Leviton VZ00R-1LX Ivory/Almond/White Vizia Light Dimmer Slave Remote Switch

Leviton VZ00R-1LX Vizia dimming remote control; this is a slave unit that is to be used with all Vizia 120V dimmers and fan speed controls. This will NOT work as a stand alone dimmer or switch and must be wired in a circuit with a Vizia Master dimmer. It will ONLY work if wired in conjunction with a Leviton Vizia Dimmer or Fan Control (sold separately). Each includes one ivory, one white and one almond faceplate that can be snapped in place to match your decor. State of the art performance in a stylish form factor. Features include:

• Provides multi-location (up to 5 locations) full range dimming and speed control when used with Leviton 120V Vizia Digital Dimmers and Fan Speed Controls (sold separately) - must be installed with a Vizia dimmer or fan speed control
• Rated 120V 60Hz; no load rating - cannot be wired directly to a fixture
• LED indicator bar on right side allows user to set brightness level when lights are ON or OFF
• Return-to-neutral push pad - always returns to neutral regardless of load status
• Press and hold push pad to turn lights on to full bright from any preset light level
• To use the Delayed OFF feature while lights are ON (10 seconds to OFF), press and hold the push pad
• LED brightness display on left side for convenient visual verification of brightness setting
• LED locator at bottom center is illuminated when the load is OFF to make it easier to locate in the dark
• Microcontroller with onboard non-volatile memory - power failure recovery assures retention of lighting levels during long-term power interruptions
• Minimum brightness level can be easily programmed from 1 to 50% of full brightness
• Dim Lock/Speed-Lock level feature determines preset light level regardless of last setting
• Compatible with Leviton Vizia color changes kits so switching colors is a snap
• Easy to operate for people of all ages and abilities
• Streamlined Decora styling to match existing Decora devices
• Compatible with Decora screwless and Decora standard designer wallplates (sold separately)
• Back and side wiring terminals for installation flexibility
• Fits in standard wallbox ? units may be ganged
• Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to each phase
• Wallplate sold separately.