{"title":"Occupancy Motion Sensors","description":null,"products":[{"product_id":"leviton-white-pir-rf-wireless-self-powered-occupancy-sensor-1500-sq-ft-wsc15-i0w","title":"Leviton White PIR RF Wireless Self-PoweRed Occupancy Sensor 1500 Sq Ft WSC15-I0W","description":"Leviton WSC15-I0W white RF wireless self-powered occupancy sensor. The Leviton line of wireless occupancy sensors (WSXX-I0W) work in conjunction with the wireless wall switch receiver (WSS10-xDX) and the wireless self-powered remote switch (WSS0S-P0X). These wireless products combine Leviton's occupancy sensing technology with self-powered and wireless technologies, developed and licensed from EnOcean. The wireless occupancy sensors have a built-in solar cell that draws on available room light to power itself and can operate for up to 48 hours without the need for batteries or external power in standard manual-on\/auto-off mode. Batteries are required for continuous uninterrupted auto-on operation. The sensors use a small detector located directly behind a unique multi-zone optical lens. This exclusive Fresnel lens establishes dozens of zones of detection, which can be configured (manual masking) to block out unwanted traffic zones (i.e. Outside hallway traffic). The sensors respond to any source of heat within the range of detection, including the heat emitted by the human body, however, the sensor is only triggered when the source of heat moves from one zone of sensing to another. Stationary heat sources will not trigger the sensor. Wireless self-powered PIR occupancy sensor, 1500 Sq. Ft. Wireless receivers and transmitters sold separately. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e \u003cli\u003eNo Additional Wiring \u003c\/li\u003e\n\u003cli\u003eOccupancy sensors are shipped in manual-on\/auto-off default mode from the factory \u003c\/li\u003e\n\u003cli\u003eSolar panel provides up to 48 hours of power to the occupancy sensor when no ambient light is available \u003c\/li\u003e\n\u003cli\u003eProvides increased energy savings by not leaving the lights on for an extended period after momentary occupancy \u003c\/li\u003e\n\u003cli\u003eUses minimum components for maximum reliability and low cost \u003c\/li\u003e\n\u003cli\u003eCeiling mount \u003c\/li\u003e\n\u003cli\u003eIndoor Use only \u003c\/li\u003e\n\u003cli\u003e450 square feet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085731078396,"sku":"LWSC15-I0W-EA","price":45.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LWSC15-I0W-EA-2.jpg?v=1778551781"},{"product_id":"leviton-wsc04-i0w-white-rf-wireless-self-powered-occupancy-sensor-450-sq-feet","title":"Leviton WSC04-I0W White RF Wireless Self-PoweRed Occupancy Sensor 450 Sq Feet","description":"Leviton WSC04-I0W white RF wireless self-powered occupancy sensor. The Leviton line of wireless occupancy sensors (WSXX-I0W) work in conjunction with the wireless wall switch receiver (WSS10-xDX) and the wireless self-powered remote switch (WSS0S-P0X). These wireless products combine Leviton's occupancy sensing technology with self-powered and wireless technologies, developed and licensed from EnOcean. The wireless occupancy sensors have a built-in solar cell that draws on available room light to power itself and can operate for up to 48 hours without the need for batteries or external power in standard manual-on\/auto-off mode. Batteries are required for continuous uninterrupted auto-on operation. The sensors use a small detector located directly behind a unique multi-zone optical lens. This exclusive Fresnel lens establishes dozens of zones of detection, which can be configured (manual masking) to block out unwanted traffic zones (i.e. Outside hallway traffic). The sensors respond to any source of heat within the range of detection, including the heat emitted by the human body, however, the sensor is only triggered when the source of heat moves from one zone of sensing to another. Stationary heat sources will not trigger the sensor. Wireless self-powered PIR occupancy sensor, 450 Sq. Ft. Wireless receivers and transmitters sold separately. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e \u003cli\u003eNo Additional Wiring \u003c\/li\u003e\n\u003cli\u003eOccupancy sensors are shipped in manual-on\/auto-off default mode from the factory \u003c\/li\u003e\n\u003cli\u003eSolar panel provides up to 48 hours of power to the occupancy sensor when no ambient light is available \u003c\/li\u003e\n\u003cli\u003eProvides increased energy savings by not leaving the lights on for an extended period after momentary occupancy \u003c\/li\u003e\n\u003cli\u003eUses minimum components for maximum reliability and low cost \u003c\/li\u003e\n\u003cli\u003eCeiling mount \u003c\/li\u003e\n\u003cli\u003eIndoor Use only \u003c\/li\u003e\n\u003cli\u003e450 square feet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085850681596,"sku":"LWSC04-I0W-EA","price":20.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LWSC04-I0W-EA-2.jpg?v=1778553948"},{"product_id":"leviton-l206-ct-lonworks-dimming-control-unit-for-motion-occupancy-sensor-switch","title":"Leviton L206-CT Lonworks Dimming Control Unit For Motion Occupancy Sensor Switch","description":"Leviton L206-CT 600W incandescent dimming light control. To be used in a network with Leviton Lonworks occupancy sensors and control units. Features include:\u003cul\u003e\n\u003cli\u003eDesigned for use in a Leviton Lonworks lighting control network for the ultimate in facility control and energy savings \u003c\/li\u003e\n\u003cli\u003eMay control as many as 5 (in any combination) sensor units, switch units, and dimming units including: L291-T, L482-T, L775-T, L776-T, L777-T, L778-T, L779-T, L780-T, L781-T, and L979-T (should be compatible with other Lonworks devices not listed)\u003c\/li\u003e\n\u003cli\u003eLight harvesting capable\u003c\/li\u003e\n\u003cli\u003eNetwork output variables: node object status output, triac feedback, triac device override feedback, low voltage control feedback, low voltage control device override feedback \u003c\/li\u003e\n\u003cli\u003eNetwork input variables: node object mode input, scene mode input, triac input, triac occupancy state, triac ambient light level, triac maintain lux level, triac device override, triac manual override-on, low voltage control input, low voltage control occupancy state, low voltage control ambient light level, and low voltage control maintain lux level\u003c\/li\u003e\n\u003cli\u003eMaximum load controlled: 600W 120VAC incandescent\u003c\/li\u003e\n\u003cli\u003eControl box power consumption: 15VA @ 120VAC\u003c\/li\u003e\n\u003cli\u003eTwo control buttons: one for node and 15VDC reset; one for service request\/go unconfigured\u003c\/li\u003e\n\u003cli\u003e2 status LED's: node status indicator; relay #1 (relay #2 LED is not used on this unit) \u003c\/li\u003e\n\u003cli\u003eIntended to be mounted directly to a junction box \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085866344700,"sku":"LL206-CT-EA","price":54.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LL206-CT-EA-UP-2.jpg?v=1778554312"},{"product_id":"leviton-lonworks-white-decora-occupancy-motion-sensor-switch-l777-t","title":"Leviton Lonworks White Decora Occupancy Motion Sensor Switch L777-T","description":"Leviton Decora L777-T white surface mount Lonworks passive infared occupancy sensor switch. To be used in conjunction with a Leviton L206-CT or L720-CT control unit. Designed to turn lights on when motion is detected and to turn them off a preselected period of time after motion has ceased. Commercial Grade with all of the features that you need for optimal light control: ambient light sensor, manual override, and adjustable time delay. Features include:\u003cul\u003e \u003cli\u003ePush-button configuration allows manual override of occupancy sensor - also configurable to be a dimmer or switch\u003c\/li\u003e\n\u003cli\u003eTurns lights on when motion is detected and turns them off a preset time after it ceases \u003c\/li\u003e\n\u003cli\u003eTime-out control - adjustable over network \u003c\/li\u003e\n\u003cli\u003eSensitivity control - adjustable over network\u003c\/li\u003e\n\u003cli\u003eAmbient light setting to avoid activating lights when they are not required \u003c\/li\u003e\n\u003cli\u003eCommercial Specification Grade: 11-24VDC operating voltage, 50mA \u003c\/li\u003e\n\u003cli\u003e180 to 32 degree field of view: 60' width, 38' range. \u003c\/li\u003e\n\u003cli\u003eRequires a Leviton L206-CT or L720-CT control unit or compatible equivalent (sold separately) - will not function without at least one in the network circuit \u003c\/li\u003e\n\u003cli\u003eFor single pole and multi-location applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ White","offer_id":49085867393276,"sku":"LL777-T-EA","price":8.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/L0L777-T-EA-2.jpg?v=1778554332"},{"product_id":"leviton-l979-t-white-surface-lonworks-occupancy-motion-sensor-dimmer-switch","title":"Leviton L979-T White Surface Lonworks Occupancy Motion Sensor Dimmer Switch","description":"Leviton Decora L979-T white flush mount Lonworks passive infared occupancy sensor dimmer switch. To be used in conjunction with a Leviton L206-CT or L720-CT control unit. Designed to turn lights on when motion is detected and to turn them off a preselected period of time after motion has ceased. Commercial Grade with all of the features that you need for optimal light control: dimming capable, ambient light sensor, manual override, and adjustable time delay. Features include:\u003cul\u003e \u003cli\u003eTwo push-button configuration allows manual dimming or override of occupancy sensor - network configurable to be dimmer or switch \u003c\/li\u003e\n\u003cli\u003eTurns lights on when motion is detected and turns them off a preset time after it ceases \u003c\/li\u003e\n\u003cli\u003eTime-out control - adjustable over network \u003c\/li\u003e\n\u003cli\u003eSensitivity control - adjustable over network\u003c\/li\u003e\n\u003cli\u003eAmbient light setting to avoid activating lights when they are not required \u003c\/li\u003e\n\u003cli\u003eCommercial Specification Grade: 11-24VDC operating voltage \u003c\/li\u003e\n\u003cli\u003e180 to 32 degree field of view, 60' width, and 38' range. \u003c\/li\u003e\n\u003cli\u003eRequires a Leviton L206-CT or L720-CT control unit or compatible equivalent (sold separately) - will not function without at least one in the network circuit\u003c\/li\u003e\n\u003cli\u003eFor single pole and multi-location applications \u003c\/li\u003e\n\u003cli\u003eNetwork output variables: node object status output, device override switch value output, override-on switch value output, occupancy state output, occupancy sensor numerical output, light level output, switch value output, and preferred switch value output \u003c\/li\u003e\n\u003cli\u003eNetwork input variables: node object mode input, device override switch feedback value, field-of-view adjustment, switch feedback input, and device mode \u003c\/li\u003e\n\u003cli\u003eNetwork configuration variables: location label, maximum send time for network output, hold time for occupied state, reflection factor, field calibration, and min. change before nvo02LuxLevel updates\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ White","offer_id":49085867983100,"sku":"LL979-T-EA","price":12.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LL979-T-EA-2.jpg?v=1778554339"},{"product_id":"leviton-raceway-adapter-kit-for-occupancy-motion-sensor-odcra","title":"Leviton Raceway Adapter Kit For Occupancy Motion Sensor ODCRA","description":"Leviton ODCRA hard ceiling raceway adapter. Provides a simple solution for mounting ODCxx Series occupancy sensors to hard ceilings. Consists of two components: the Raceway Adapter Base and the Raceway Adapter Plate. The Raceway Adapter Base mounts directly to the hard ceiling, the Adapter Plate attaches to the sensor, and the sensor\/plate combination connects to the Adapter Base. Also can be mounted to a standard octagonal J Box. Features include:\u003cul\u003e\n\u003cli\u003eSmall size: an installed detector and surface mount raceway kit hides wiring and blends with the ceiling \u003c\/li\u003e\n\u003cli\u003eFast, simple installation: easy raceway installation, hard ceiling mount and three wire connections (low voltage) \u003c\/li\u003e\n\u003cli\u003eAttractive design: the white base conforms to the ODCxx sensor and appears to be a natural continuation. Raceways hide exposed wires and provide a tidy appearance. \u003c\/li\u003e\n\u003cli\u003eUnique locking mechanism: a steel clip on the raceway adapter base fits into one of 58 small holes on the raceway adapter plate, locking the sensor into position \u003c\/li\u003e\n\u003cli\u003eTamper proof alignment: locking mechanism between the base and the plate can only be reached with a flat head screwdriver. The small access hole assures tamper-proof alignment. \u003c\/li\u003e\n\u003cli\u003eRaceway compatible: Leviton?s hard ceiling raceway adapter is compatible with several standard surface mounting raceways. \u003c\/li\u003e\n\u003cli\u003eConstruction: Rugged, high-impact, ABS injection molded plastic \u003c\/li\u003e\n\u003cli\u003eAdapter plate measures 4.25\" in diameter and 0.6\" high \u003c\/li\u003e\n\u003cli\u003eAdapter base measures 5\" in diameter and 1\" high\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085873094908,"sku":"LODCRA-EA","price":19.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LODCRA-EA-2.jpg?v=1778554420"},{"product_id":"leviton-odc10-u0w-white-ultrasonic-180-ceiling-occupancy-motion-sensor-1000-ft","title":"Leviton ODC10-U0W White Ultrasonic 180� Ceiling Occupancy Motion Sensor 1000 Ft�","description":"Leviton ODC10-U0W white ultrasonic ceiling mount occupancy sensor for use with aLeviton ODP series power pack. The ability of this unit to observe, analyze and adjust is nothing short of astounding. Advanced Ultrasonic sensing technology for highly accurate monitoring with excellent immunity to air currents and other interference. All-digital self-adjusting technology provides Install and Forget solution for automatic lighting control. Features include: \u003cul\u003e \u003cli\u003eUltrasonic sensing for maximum range and sensitivity combined with high immunity to false triggering from air currents and other interference \u003c\/li\u003e\n\u003cli\u003eSelf-adjusting settings continuously analyze and adjust sensitivity, timer operation, and air current compensation for reliable, long-term performance \u003c\/li\u003e\n\u003cli\u003eAutomatic dual-mode operation adjusts to either economy or high sensitivity mode based on actual occupancy patterns for maximum energy savings \u003c\/li\u003e\n\u003cli\u003eBuilt-in Circadian Calendar Provides 4-week learning period where the sensor monitors occupancy to establish trends that serve as the basis for automatic operation. During peak occupancy periods the sensor remains in high-sensitivity mode and during low occupancy periods it switches to economy mode \u003c\/li\u003e\n\u003cli\u003eManual Delayed-OFF time settings of 8, 16, and 32 minutes, with 8-second test mode \u003c\/li\u003e\n\u003cli\u003eSelf-Adjusting Delayed-OFF time interval settings for 8 to 100 minutes Compensates for real-time occupancy patterns, preventing unnecessary ON\/OFF switching \u003c\/li\u003e\n\u003cli\u003eNon-volatile memory preserves all automatic and manual settings during power outages \u003c\/li\u003e\n\u003cli\u003e1000 square foot, 180 degree coverage - 23'x23' for minor motion and 32'x32' for major motion \u003c\/li\u003e\n\u003cli\u003eCustomizable masks provide a choice of coverage patterns, allowing you to block areas you don't want monitored \u003c\/li\u003e\n\u003cli\u003eOperating frequency: 32kHz\u003c\/li\u003e\n\u003cli\u003eSmall unobtrusive profile: 4-1\/2\" diameter, 1.4\" height\u003c\/li\u003e\n\u003cli\u003eFlexible mounting base for quick and easy installation and aiming \u003c\/li\u003e\n\u003cli\u003eRequires 24VDC 33mA from a Leviton ODP series power pack (will not operate without a power pack). Power packs may be used with one or more motion sensors depending on the circuit design\u003c\/li\u003e\n\u003cli\u003eFast, simple installation using 3 color-coded low-voltage wires and a single mounting post\u003c\/li\u003e\n\u003cli\u003eIdeal for restrooms, office areas with cubicles, general work space, warehouse and storage facilities, cafeterias and public areas in commercial facilities \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085874110716,"sku":"LODC10-U0W-EA","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LODC10-U0W-EA-2.jpg?v=1778554451"},{"product_id":"leviton-white-high-bay-fixture-mount-360-occupancy-sensor-osfhb-itw","title":"Leviton White High Bay Fixture Mount 360? Occupancy Sensor OSFHB-ITW","description":"Leviton OSFHB-ITW White High Bay Fixture Mount 360 degree Occupancy Sensor. The OSFHB-ITW High Bay occupancy sensor is specifically designed for high mounted areas such as warehouses, manufacturing and other high ceiling applications. Installs directly to an industrial fluorescent luminaire or an electrical junction box. Simply make the electrical connections inside the ballast compartment and the sensor is ready. For deep body fixtures, the OSFOA-W positions the OFSHB sensor flush or below the bottom of the reflector giving the sensor full field-of-view. Relay uses a zero crossing circuitry to provide reliable, long-life operation. Completely self-contained sensor and relay that turns individual light fixtures on or off based on occupancy in the detection zone. The specially designed PIR lens provides reliable coverage up to 40 foot mounting heights. Provides 1:1 spacing to mounting height coverage (40 ft. mounting height equals 40 ft. circular pattern) for body motion or forklift. Green LED indicates occupancy detection. Learned and adjusted settings saved in protected memory are not lost during power outages. Features include:\u003cul\u003e\n\u003cli\u003e360 Degree\u003c\/li\u003e\n\u003cli\u003e1500 Sq. Ft. Coverage\u003c\/li\u003e\n\u003cli\u003eSelf-Adjusting\u003c\/li\u003e\n\u003cli\u003eCeiling Mount Occupancy Sensor\u003c\/li\u003e\n\u003cli\u003eHigh-Bay Mount Commercial Grade\u003c\/li\u003e\n\u003cli\u003e PIR lens provides reliable coverage up to 40 foot\u003c\/li\u003e\n\u003cli\u003eGreen LED indicates occupancy detection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085874143484,"sku":"LOSFHB-ITW-EA","price":45.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LOSFHB-ITW-EA-2.jpg?v=1778554451"},{"product_id":"leviton-ipp10-1li-ivory-manual-on-motion-sensor-occupancy-switch-800w-900-sq-ft","title":"Leviton IPP10-1LI Ivory Manual-ON Motion Sensor Occupancy Switch 800W 900 sq ft","description":"Leviton IPP10-1LI ivory manual-ON occupancy sensor switch. Designed to act as a regular ON\/OFF wall switch; however, if you forget to turn the lights off, it will do it automatically a preselected period of time after motion has ceased. Great for locations where tenants, guests, kids and anyone else who does not pay the electric bill tends to leave lights on: utility rooms, basements, kitchens, bathrooms, laundry rooms, garages, etc. Passive infrared sensor with all of the features that you need in a Manual-ON occupancy sensor: aiming ability, manual override, minor motion detection, and adjustable time delay. Features include:\u003cul\u003e\n\u003cli\u003eCompatible with incandescent lamps, electronic and magnetic low-voltage ballasts, electronic and magnetic ballasts, and fans\u003c\/li\u003e\n\u003cli\u003eSingle pole - controls one light circuit from one location \u003c\/li\u003e\n\u003cli\u003e Residential grade - rated 800W-6.67A @120V incandescent, 1200VA-10A @120V fluorescent, 1\/4hp-5.8A@120V fan\u003c\/li\u003e\n\u003cli\u003eManual-ON\/Automatic OFF operation in accordance with California Title 24 2005 requirements \u003c\/li\u003e\n\u003cli\u003eLow-Profile design eliminates an obtrusive \"scanning device\" look and blends in with existing decor\u003c\/li\u003e\n\u003cli\u003e180 degree field-of-view provides approximately 900 square feet of coverage \u003c\/li\u003e\n\u003cli\u003eConvenient push-button provides Manual ON\/OFF light switching at any time \u003c\/li\u003e\n\u003cli\u003eSegmented fresnel lens provides optimum sensitivity and performance. It is designed with an extensive \"minor motion\" area where even slight body movements will be detected \u003c\/li\u003e\n\u003cli\u003eHorizontal field of view may be adjusted between 180 and 32 degrees of arc by using internal blinders located on either side of the lens \u003c\/li\u003e\n\u003cli\u003eFour optional manual adjustments for delayed-OFF time settings maximize energy savings: 30 seconds (for walking test), 10 minutes, 20 minutes and 30 minutes \u003c\/li\u003e\n\u003cli\u003eLED Indicator Light flashes when sensor detects motion to verify detection is active \u003c\/li\u003e\n\u003cli\u003eUnit can be used for 120V lighting. Compatibile with both electronic and magnetic ballasts or 1\/2HP loads\u003c\/li\u003e\n\u003cli\u003eRelay switches at zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts \u003c\/li\u003e\n\u003cli\u003eFits in standard wallbox and replaces single-pole wall switch \u003c\/li\u003e\n\u003cli\u003eRequires a neutral (white) wire connection \u003c\/li\u003e\n\u003cli\u003eWallplate sold separately \u003c\/li\u003e\n\u003cli\u003ePlease note that this unit is turned ON manually like a regular switch - it is not designed to turn lights ON automatically, only to turn them OFF automatically \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Ivory","offer_id":49085876699388,"sku":"LIPP10-1LI-EA","price":23.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LIPP10-1LI-EA-2.jpg?v=1778554519"},{"product_id":"leviton-dual-relay-110-wideview-occupancy-motion-sensor-odwhb-irw","title":"Leviton Dual RELAY 110? Wideview Occupancy Motion Sensor ODWHB-IRW","description":"Leviton ODWWV-IRW white, infared wide view wall mount occupancy sensor. Intended for use in parking garages, corner locations, rooms with pendant mount fixtures, and other high-ceiling or large open area rooms. The ability of this unit to observe, analyze and adjust is nothing short of astounding. Secondary relay can be used to send control signals to HVAC systems. Advanced Passive Infrared technology for highly accurate monitoring in a variety of commercial applications. All-digital self-adjusting technology provides \"Install and Forget\" solution for automatic lighting control. Used in conjunction with a Leviton ODP Series power pack. Features include:\u003cul\u003e \u003cli\u003eIdeal for conference rooms, stair-wells, high-ceiling rooms, large open areas, parking garages, storage rooms and rooms with pendant fixtures. Also ideal for corner mounting in a variety of applications \u003c\/li\u003e\n\u003cli\u003eSelf-adjusting settings continuously analyze and adjust infrared sensitivity, timer operation, and air current compensation for reliable, long-term performance \u003c\/li\u003e\n\u003cli\u003eAdjustable swivel neck rotates 80 degrees vertically and 60 degrees horizontal - can be used for ceiling or wall mounting \u003c\/li\u003e\n\u003cli\u003eAutomatic dual-mode operation adjusts to either economy or high-sensitivity mode based on actual occupancy patterns for maximum energy savings \u003c\/li\u003e\n\u003cli\u003eBuilt-in circadian calendar - provides 4-week learning period where the sensor monitors occupancy to establish trends that serve as the basis for automatic operation. During peak occupancy periods the sensor remains in high-sensitivity mode and during low occupancy periods it switches to economy mode \u003c\/li\u003e\n\u003cli\u003e110 degree field of view \u003c\/li\u003e\n\u003cli\u003e2,500 square foot coverage with an 8-foot ceiling; 40 ft. range \u003c\/li\u003e\n\u003cli\u003eAmbient light override option prevents lights from turning ON when there is ample natural light\u003c\/li\u003e\n\u003cli\u003eSecondary relay can be used to send control signals to HVAC systems based on occupancy detection \u003c\/li\u003e\n\u003cli\u003eSecondary relay: single-pole double-throw (SPDT), rated 500 mA @ 24V AC\/DC, three-wire isolated relay \u003c\/li\u003e\n\u003cli\u003eManual Delayed-OFF time settings of 4, 8, 16, and 32 minutes, with 8-second test mode \u003c\/li\u003e\n\u003cli\u003eSelf-Adjusting Delayed-OFF time interval settings for 4 to 100 minutes - compensates for real-time occupancy patterns, preventing unnecessary ON\/OFF switching \u003c\/li\u003e\n\u003cli\u003eNon-volatile memory preserves all automatic and manual settings during power outages \u003c\/li\u003e\n\u003cli\u003eFast, simple installation using 3 color-coded low-voltage wires and a single mounting post \u003c\/li\u003e\n\u003cli\u003ePLEASE NOTE: This requires 24VDC 33mA from a Leviton ODP series power pack or compatible equivalent (sold separately) - will not operate without a power pack. Power packs may be used with one or more motion sensors depending on the circuit design\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085877387516,"sku":"LODWWV-IRW-EA","price":45.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LODWWV-IRW-EA-2.jpg?v=1778554536"},{"product_id":"leviton-white-ultrasonic-180-ceiling-occupancy-motion-sensor-1000-sft-odc10-urw","title":"Leviton White Ultrasonic 180? Ceiling Occupancy Motion Sensor 1000 sft ODC10-URW","description":"Leviton ODC10-URW white ultrasonic ceiling mount occupancy sensor for use with a Leviton ODP series power pack. The ability of this unit to observe, analyze and adjust is nothing short of astounding. Secondary relay can be used to send control signals to HVAC systems. Advanced Ultrasonic sensing technology for highly accurate monitoring with excellent immunity to air currents and other interference. All-digital self-adjusting technology provides Install and Forget solution for automatic lighting control. Features include: \u003cul\u003e \u003cli\u003eUltrasonic sensing for maximum range and sensitivity combined with high immunity to false triggering from air currents and other interference \u003c\/li\u003e\n\u003cli\u003eSelf-adjusting settings continuously analyze and adjust sensitivity, timer operation, and air current compensation for reliable, long-term performance \u003c\/li\u003e\n\u003cli\u003eAutomatic dual-mode operation adjusts to either economy or high sensitivity mode based on actual occupancy patterns for maximum energy savings \u003c\/li\u003e\n\u003cli\u003eBuilt-in Circadian Calendar  Provides 4-week learning period where the sensor monitors occupancy to establish trends that serve as the basis for automatic operation. During peak occupancy periods the sensor remains in high-sensitivity mode and during low occupancy periods it switches to economy mode \u003c\/li\u003e\n\u003cli\u003eManual Delayed-OFF time settings of 8, 16, and 32 minutes, with 8-second test mode \u003c\/li\u003e\n\u003cli\u003eSecondary relay can be used to send control signals to HVAC systems based on occupancy detection \u003c\/li\u003e\n\u003cli\u003eSecondary relay single-pole double-throw (SPDT), rated 500 mA @ 24V AC\/DC, three-wire isolated relay\u003c\/li\u003e\n\u003cli\u003eSelf-Adjusting Delayed-OFF time interval settings for 8 to 100 minutes. Compensates for real-time occupancy patterns, preventing unnecessary ON\/OFF switching \u003c\/li\u003e\n\u003cli\u003eNon-volatile memory preserves all automatic and manual settings during power outages \u003c\/li\u003e\n\u003cli\u003e1000 square foot, 180 degree coverage - 23'x23' for minor motion and 32'x32' for major motion \u003c\/li\u003e\n\u003cli\u003eCustomizable masks provide a choice of coverage patterns, allowing you to block areas you don't want monitored \u003c\/li\u003e\n\u003cli\u003eOperating frequency: 32kHz\u003c\/li\u003e\n\u003cli\u003eSmall unobtrusive profile: 4-1\/2\" diameter, 1.4\" height\u003c\/li\u003e\n\u003cli\u003eFlexible mounting base for quick and easy installation and aiming \u003c\/li\u003e\n\u003cli\u003eRequires 24VDC 33mA from a Leviton ODP series power pack (will not operate without a power pack). Power packs may be used with one or more motion sensors depending on the circuit design\u003c\/li\u003e\n\u003cli\u003eFast, simple installation using 3 color-coded low-voltage wires and a single mounting post\u003c\/li\u003e\n\u003cli\u003eIdeal for restrooms, office areas with cubicles, general work space, warehouse and storage facilities, cafeterias and public areas in commercial facilities \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085877813500,"sku":"LODC10-URW-EA","price":77.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LODC10-URW-EA-2.jpg?v=1778554548"},{"product_id":"leviton-odc10-urw-white-ultrasonic-180-ceiling-occupancy-motion-sensor-1000-sft","title":"Leviton ODC10-URW White Ultrasonic 180�Ceiling Occupancy Motion Sensor 1000 sft","description":"Leviton ODC20-URW white ultrasonic ceiling mount occupancy sensor for use with a Leviton ODP series power pack. The ability of this unit to observe, analyze and adjust is nothing short of astounding. Secondary relay can be used to send control signals to HVAC systems. Advanced Ultrasonic sensing technology for highly accurate monitoring with excellent immunity to air currents and other interference. All-digital self-adjusting technology provides \"Install and Forget\" solution for automatic lighting control. Features include: \u003cul\u003e \u003cli\u003eUltrasonic sensing for maximum range and sensitivity combined with high immunity to false triggering from air currents and other interference \u003c\/li\u003e\n\u003cli\u003eSelf-adjusting settings continuously analyze and adjust sensitivity, timer operation, and air current compensation for reliable, long-term performance \u003c\/li\u003e\n\u003cli\u003eAutomatic dual-mode operation adjusts to either economy or high sensitivity mode based on actual occupancy patterns for maximum energy savings \u003c\/li\u003e\n\u003cli\u003eBuilt-in Circadian Calendar - Provides 4-week learning period where the sensor monitors occupancy to establish trends that serve as the basis for automatic operation. During peak occupancy periods the sensor remains in high-sensitivity mode and during low occupancy periods it switches to economy mode \u003c\/li\u003e\n\u003cli\u003eAmbient light override option prevents lights from turning ON when there is ample natural light\u003c\/li\u003e\n\u003cli\u003eManual Delayed-OFF time settings of 8, 16, and 32 minutes, with 8-second test mode \u003c\/li\u003e\n\u003cli\u003eSecondary relay can be used to send control signals to HVAC systems based on occupancy detection \u003c\/li\u003e\n\u003cli\u003eSecondary relay - single-pole double-throw (SPDT), rated 500 mA @ 24V AC\/DC, three-wire isolated relay \u003c\/li\u003e\n\u003cli\u003eSelf-Adjusting Delayed-OFF time interval settings for 8 to 100 minutes - Compensates for real-time occupancy patterns, preventing unnecessary ON\/OFF switching \u003c\/li\u003e\n\u003cli\u003eNon-volatile memory preserves all automatic and manual settings during power outages \u003c\/li\u003e\n\u003cli\u003e2000 square foot, 180 degree coverage - 23'x45' for minor motion and 32'x64' for major motion\u003c\/li\u003e\n\u003cli\u003eCustomizable masks provide a choice of coverage patterns, allowing you to block areas you don't want monitored \u003c\/li\u003e\n\u003cli\u003eOperating frequency: 32kHz\u003c\/li\u003e\n\u003cli\u003eSmall unobtrusive profile: 4-1\/2\" diameter, 1.4\" height\u003c\/li\u003e\n\u003cli\u003eFlexible mounting base for quick and easy installation and aiming \u003c\/li\u003e\n\u003cli\u003eRequires 24VDC 33mA from a Leviton ODP series power pack (will not operate without a power pack). Power packs may be used with one or more motion sensors depending on the circuit design\u003c\/li\u003e\n\u003cli\u003eFast, simple installation using 3 color-coded low-voltage wires and a single mounting post\u003c\/li\u003e\n\u003cli\u003eIdeal for restrooms, office areas with cubicles, general work space, warehouse and storage facilities, cafeterias and public areas in commercial facilities \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085877846268,"sku":"LODC20-URW-EA","price":41.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LODC20-URW-EA-UPDATED-2.jpg?v=1778554556"},{"product_id":"leviton-white-dual-relay-180-ceiling-occupancy-motion-sensor-1000-sft-odc10-mrw","title":"Leviton White Dual RELAY 180? Ceiling Occupancy Motion Sensor 1000 sft ODC10-MRW","description":"Leviton ODC10-MRW white multi-technology ceiling-mount occupancy sensor. Please note that this type of sensor must be powered by a Leviton ODP series power pack. This is a high-end sensor with the ultimate in built-in self-learning technologies - install it and forget it - the sensor does the rest. The ability of this unit to observe, analyze and adjust is nothing short of astounding. Secondary relay can be used to send control signals to HVAC systems. Advanced motion sensor combines infrared and ultrasonic technology for highly accurate monitoring without false triggering. All-digital self-adjusting technology provides \"Install and Forget\" solution for automatic lighting control. Features include: \u003cul\u003e\n\u003cli\u003eIdeal for office areas with cubicles, general work space, warehouse and storage facilities, cafeterias and public areas in commercial facilities \u003c\/li\u003e\n\u003cli\u003eComposite sensing - combination of IR and ultrasonic sensors greatly reduces false triggers from items such as air conditiong and corridor activity\u003c\/li\u003e\n\u003cli\u003eSelf-adjusting settings continuously analyze and adjust IR sensitivity, timer operation, and air current compensations for reliable, long-term performance\u003c\/li\u003e\n\u003cli\u003eAutomatic dual-mode operation adjusts to either economy of high sensitivity mode based on actual occupancy patterns for maximum energy savings\u003c\/li\u003e\n\u003cli\u003eBuilt-in circadian calendar - provides 4-week learning period where the sensor monitors occupancy to establish trends that serve as the basis for automatic operation. During peak occupancy periods the sensor remains in high-sensitivity mode mode and during low occupancy periods it switches to economy mode \u003c\/li\u003e\n\u003cli\u003eAmbient light override option prevents lights from turning ON when there is ample natural light\u003c\/li\u003e\n\u003cli\u003eManual Delayed-OFF time settings of 8, 16, and 32 minutes, with 8-second test mode \u003c\/li\u003e\n\u003cli\u003eSecondary relay can be used to send control signals to HVAC systems based on occupancy detection \u003c\/li\u003e\n\u003cli\u003eSecondary relay: single-pole double-throw (SPDT), rated 500 mA @ 24V AC\/DC, three-wire isolated relay \u003c\/li\u003e\n\u003cli\u003eManual delayed-OFF time settings of 8, 16, and 32 minutes with 8 second test mode\u003c\/li\u003e\n\u003cli\u003e Self-adjusting delayed-OFF time interval settings for 8 to 100 minutes - compensates for real-time occupancy patterns, preventing unnecessary ON\/OFF switching\u003c\/li\u003e\n\u003cli\u003eNon-volatile memory preserves all automatic and manual settings during power outages \u003c\/li\u003e\n\u003cli\u003e1000 square foot coverage, 180 degree field of view \u003c\/li\u003e\n\u003cli\u003eCustomizable masks provide a choice of coverage patterns, allowing you to block areas you don't want monitored \u003c\/li\u003e\n\u003cli\u003eOperating frequency: 32kHz\u003c\/li\u003e\n\u003cli\u003eSmall unobtrusive profile: 4-1\/2\" diameter, 1.4\" height \u003c\/li\u003e\n\u003cli\u003ePLEASE NOTE: This requires 24VDC 33mA from a Leviton ODP series power pack or compatible equivalent (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085878829308,"sku":"LODC10-MRW-EA","price":45.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LODC10-MRW-EA-UP-2.jpg?v=1778554575"},{"product_id":"white-pir-360-dual-relay-ceiling-occupancy-motion-sensor-450sq-ft-odc04-irw","title":"White PIR 360? Dual RELAY Ceiling Occupancy Motion Sensor 450sq ft ODC04-IRW","description":"Leviton ODC04-IRW white ceiling-mount passive infrared occupancy sensor for use with a Leviton ODP series power pack. The ability of this unit to observe, analyze and adjust is nothing short of astounding. Secondary relay can be used to send control signals to HVAC systems. Advanced Passive Infrared technology for highly accurate monitoring in a variety of commercial applications. All-digital self-adjusting technology provides \"Install and Forget\" solution for automatic lighting control. Features include:\u003cul\u003e\n\u003cli\u003eIdeal for use in small offices, general work areas, closets, restrooms, and other small areas in commercial facilities \u003c\/li\u003e\n\u003cli\u003eSelf-adjusting settings continuously analyze and adjust infrared sensitivity, timer operation, and air current compensation for reliable, long-term performance \u003c\/li\u003e\n\u003cli\u003eAutomatic dual-mode operation adjusts to either economy or high sensitivity mode based on actual occupancy patterns for maximum energy savings \u003c\/li\u003e\n\u003cli\u003eBuilt-in circadian calendar provides 4-week learning period where the sensor monitors occupancy to establish trends that serve as the basis for automatic operation. During peak occupancy periods the sensor remains in high-sensitivity mode and during low occupancy periods it switches to economy mode \u003c\/li\u003e\n\u003cli\u003eAmbient light override option prevents lights from turning ON when there is ample natural light\u003c\/li\u003e\n\u003cli\u003eSecondary relay can be used to send control signals to HVAC systems based on occupancy detection \u003c\/li\u003e\n\u003cli\u003eSecondary relay - single-pole double-throw (SPDT), rated 500 mA @ 24V AC\/DC, three-wire isolated relay\u003c\/li\u003e\n\u003cli\u003e450 square foot coverage area \u003c\/li\u003e\n\u003cli\u003e360 degree field of view \u003c\/li\u003e\n\u003cli\u003eCustomizable masks provide a choice of coverage patterns, allowing you to block areas you don't want monitored \u003c\/li\u003e\n\u003cli\u003eManual Delayed-OFF time settings of 8, 16, and 32 minutes, with 8-second test mode \u003c\/li\u003e\n\u003cli\u003eSelf-Adjusting Delayed-OFF time interval settings for 8 to 100 minutes - compensates for real-time occupancy patterns, preventing unnecessary ON\/OFF switching \u003c\/li\u003e\n\u003cli\u003eNon-volatile memory preserves all automatic and manual settings during power outages \u003c\/li\u003e\n\u003cli\u003eSmall, unobtrusive size blends in with any decor: 4.5\" diameter, 1.4\" height \u003c\/li\u003e\n\u003cli\u003eRequires 24VDC 33mA from a Leviton ODP series power pack or compatible equivalent (sold separately) - will not operate without a power pack. Power packs may be used with one or more motion sensors depending on the circuit design\u003c\/li\u003e\n\u003cli\u003eFast, simple installation using 3 color-coded low-voltage wires and a single mounting post \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085879943420,"sku":"LODC04-IRW-EA","price":41.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LODC04-IRW-EA-2.jpg?v=1778554594"},{"product_id":"leviton-black-nipple-adapter-for-leviton-occupancy-motion-sensor-odpna","title":"Leviton Black Nipple Adapter for Leviton Occupancy Motion Sensor ODPNA","description":"Leviton ODPNA low-voltage nipple adapter with 1\/2\" lock nut. Designed for use with Leviton ODP Series Power Packs and ODA series Add-A-Relay units. Split-collar\/locknut design converts power packs and add-a-relays so that they have threaded fittings at both ends instead of just at one end. Simplifies the connection of occupancy sensor to the low-voltage side of a power pack mounted inside a fluorescent ballast cavity.","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085880664316,"sku":"LODPNA-EA","price":1.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LODPNA-EA-2.jpg?v=1778554619"},{"product_id":"leviton-ipp10-1la-almond-manual-on-motion-sensor-occupancy-switch-800w-900-feet","title":"Leviton IPP10-1LA Almond Manual-ON Motion Sensor Occupancy Switch 800W 900 Feet?","description":"Leviton IPP10-1LA almond manual-ON occupancy sensor switch. Designed to act as a regular ON\/OFF wall switch; however, if you forget to turn the lights off, it will do it automatically a preselected period of time after motion has ceased. Great for locations where tenants, guests, kids and anyone else who does not pay the electric bill tends to leave lights on: utility rooms, basements, kitchens, bathrooms, laundry rooms, garages, etc. Passive infrared sensor with all of the features that you need in a Manual-ON occupancy sensor: aiming ability, manual override, minor motion detection, and adjustable time delay. Features include:\u003cul\u003e\n\u003cli\u003eCompatible with incandescent lamps, electronic and magnetic low-voltage ballasts, electronic and magnetic ballasts, and fans\u003c\/li\u003e\n\u003cli\u003eSingle pole - controls one light circuit from one location \u003c\/li\u003e\n\u003cli\u003e Residential grade - rated 800W-6.67A @120V incandescent, 1200VA-10A @120V fluorescent, 1\/4hp-5.8A@120V fan\u003c\/li\u003e\n\u003cli\u003eManual-ON\/Automatic OFF operation in accordance with California Title 24 2005 requirements \u003c\/li\u003e\n\u003cli\u003eLow-Profile design eliminates an obtrusive \"scanning device\" look and blends in with existing decor\u003c\/li\u003e\n\u003cli\u003e180 degree field-of-view provides approximately 900 square feet of coverage \u003c\/li\u003e\n\u003cli\u003eConvenient push-button provides Manual ON\/OFF light switching at any time \u003c\/li\u003e\n\u003cli\u003eSegmented fresnel lens provides optimum sensitivity and performance. It is designed with an extensive \"minor motion\" area where even slight body movements will be detected \u003c\/li\u003e\n\u003cli\u003eHorizontal field of view may be adjusted between 180 and 32 degrees of arc by using internal blinders located on either side of the lens \u003c\/li\u003e\n\u003cli\u003eFour optional manual adjustments for delayed-OFF time settings maximize energy savings: 30 seconds (for walking test), 10 minutes, 20 minutes and 30 minutes \u003c\/li\u003e\n\u003cli\u003eLED Indicator Light flashes when sensor detects motion to verify detection is active \u003c\/li\u003e\n\u003cli\u003eUnit can be used for 120V lighting. Compatibile with both electronic and magnetic ballasts or 1\/2HP loads\u003c\/li\u003e\n\u003cli\u003eRelay switches at zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts \u003c\/li\u003e\n\u003cli\u003eFits in standard wallbox and replaces single-pole wall switch \u003c\/li\u003e\n\u003cli\u003eRequires a neutral (white) wire connection \u003c\/li\u003e\n\u003cli\u003eWallplate sold separately \u003c\/li\u003e\n\u003cli\u003ePlease note that this unit is turned ON manually like a regular switch - it is not designed to turn lights ON automatically, only to turn them OFF automatically \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Almond","offer_id":49085881483516,"sku":"LIPP10-1LA-EA","price":24.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LIPP10-1LA-EA-2.jpg?v=1778554639"},{"product_id":"leviton-oda00-occupancy-motion-sensor-add-a-relay-powerpack","title":"Leviton ODA00 Occupancy Motion Sensor Add-a-Relay Powerpack","description":"Leviton ODA00 occupancy sensor add-a-relay unit - it should be equivalent to Leviton ODA13. Commercial Specification Grade, 13A, 5mA?24V DC control input. Used to expand the control capability of Leviton ODP13 series occupancy power packs so that additional loads can be added.","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085882728700,"sku":"LODA00-EA","price":14.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LODA00-EA-2.jpg?v=1778554654"},{"product_id":"leviton-occupancy-motion-sensor-power-pack-20a-230v-odp20-20","title":"Leviton Occupancy Motion Sensor Power Pack 20A 230V ODP20-20","description":"Leviton ODP20-20 230V occupancy sensor power pack. Contains a 24VDC power supply to provide power to Leviton motion\/occupancy sensors and a relay to provide switching to a lighting load. This is for use with Leviton ODC and ODW series occupancy sensors and the Leviton ODA Add-a-Relay. Specifications include: \u003cul\u003e \u003cli\u003ePower input: 230VAC, 50 \u0026amp; 60Hz\u003c\/li\u003e\n\u003cli\u003ePower output: 24VDC, 100mA (Class 2) \u003c\/li\u003e\n\u003cli\u003eControl input: 24VDC, 5mA \u003c\/li\u003e\n\u003cli\u003eRelay rating: 20A @ 230V for fluorescent only \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085882663164,"sku":"LODP20-20-EA","price":15.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LODP20-20-EA-2.jpg?v=1778554662"},{"product_id":"leviton-odp13-20-occupancy-motion-sensor-power-pack-13a-230v","title":"Leviton ODP13-20 Occupancy Motion Sensor Power Pack 13A 230V","description":"Leviton ODP13-20 230V occupancy sensor power pack. Contains a 24VDC power supply to provide power to Leviton motion\/occupancy sensors and a relay to provide switching to a lighting load. This is for use with Leviton ODC and ODW series occupancy sensors and the Leviton ODA Add-a-Relay. Specifications include: \u003cul\u003e \u003cli\u003ePower input: 230VAC, 50Hz \u0026amp; 60Hz \u003c\/li\u003e\n\u003cli\u003ePower output: 24VDC, 100mA (Class 2) \u003c\/li\u003e\n\u003cli\u003eControl input: 24VDC, 5mA \u003c\/li\u003e\n\u003cli\u003eRelay rating: 13A@230VAC fluorescent ONLY\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085882892540,"sku":"LODP13-20-EA","price":18.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LODP13-20-EA-2.jpg?v=1778554662"},{"product_id":"leviton-occupancy-motion-sensor-power-pack-20a-277v-odp20-70","title":"Leviton Occupancy Motion Sensor Power Pack 20A 277V ODP20-70","description":"Leviton ODP20-70 277V occupancy sensor power pack. Contains a 24VDC power supply to provide power to Leviton motion\/occupancy sensors and a relay to provide switching to a lighting load. This is for use with Leviton ODC and ODW series occupancy sensors and the Leviton ODA Add-a-Relay. Specifications include: \u003cul\u003e \u003cli\u003ePower input: 277VAC ONLY\u003c\/li\u003e\n\u003cli\u003ePower output: 24VDC, 100mA (Class 2) \u003c\/li\u003e\n\u003cli\u003eControl input: 24VDC, 5mA \u003c\/li\u003e\n\u003cli\u003eRelay rating: 20A @ 277V for fluorescent only \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085882990844,"sku":"LODP20-70-EA","price":24.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LODP20-70-EA-G.jpg?v=1778554662"},{"product_id":"leviton-odp15-30-occupancy-15a-motion-sensor-power-pack-347v-fluorescent-only","title":"Leviton ODP15-30 Occupancy 15A Motion Sensor Power Pack 347V Fluorescent Only","description":"Leviton ODP15-30 347V occupancy sensor power pack. Contains a 24VDC power supply to provide power to Leviton motion\/occupancy sensors and a relay to provide switching to a lighting load. This is for use with Leviton ODC and ODW series occupancy sensors and the Leviton ODA Add-a-Relay. Specifications include: \u003cul\u003e \u003cli\u003ePower input: 347VAC, 60Hz ONLY \u003c\/li\u003e\n\u003cli\u003ePower output: 24VDC, 100mA (Class 2) \u003c\/li\u003e\n\u003cli\u003eControl input: 24VDC, 5mA \u003c\/li\u003e\n\u003cli\u003eRelay rating: 15A @ 347V fluorescent only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085883023612,"sku":"LODP15-30-EA","price":9.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LODP15-30-EA-3.jpg?v=1778554669"},{"product_id":"leviton-dual-relay-white-ultrasonic-180-ceiling-motion-sensor-500sq-ft-odc05-ur","title":"Leviton Dual RELAY White Ultrasonic 180? Ceiling Motion Sensor 500sq ft ODC05-UR","description":"Leviton ODC05-URW white ultrasonic ceiling mount occupancy sensor for use with a Leviton ODP series power pack. The ability of this unit to observe, analyze and adjust is nothing short of astounding. Advanced Ultrasonic sensing technology for highly accurate monitoring with excellent immunity to air currents and other interference. All-digital self-adjusting technology provides Install and Forget solution for automatic lighting control. Features include: \u003cul\u003e \u003cli\u003eUltrasonic sensing for maximum range and sensitivity combined with high immunity to false triggering from air currents and other interference \u003c\/li\u003e\n\u003cli\u003eSelf-adjusting settings continuously analyze and adjust sensitivity, timer operation, and air current compensation for reliable, long-term performance \u003c\/li\u003e\n\u003cli\u003eAutomatic dual-mode operation adjusts to either economy or high sensitivity mode based on actual occupancy patterns for maximum energy savings \u003c\/li\u003e\n\u003cli\u003eBuilt-in Circadian Calendar Provides 4-week learning period where the sensor monitors occupancy to establish trends that serve as the basis for automatic operation. During peak occupancy periods the sensor remains in high-sensitivity mode and during low occupancy periods it switches to economy mode \u003c\/li\u003e\n\u003cli\u003eAmbient light override option prevents lights from turning ON when there is ample natural light\u003c\/li\u003e\n\u003cli\u003eSecondary relay can be used to send control signals to HVAC systems based on occupancy detection \u003c\/li\u003e\n\u003cli\u003eSecondary relay single-pole double-throw (SPDT), rated 500 mA @ 24V AC\/DC, three-wire isolated relay \u003c\/li\u003e\n\u003cli\u003eManual Delayed-OFF time settings of 8, 16, and 32 minutes, with 8-second test mode \u003c\/li\u003e\n\u003cli\u003eSelf-Adjusting Delayed-OFF time interval settings for 8 to 100 minutes Compensates for real-time occupancy patterns, preventing unnecessary ON\/OFF switching \u003c\/li\u003e\n\u003cli\u003eNon-volatile memory preserves all automatic and manual settings during power outages \u003c\/li\u003e\n\u003cli\u003e500 square foot, 180 degree coverage - 17'x17' for minor motion and 23'x23' for major motion \u003c\/li\u003e\n\u003cli\u003eCustomizable masks provide a choice of coverage patterns, allowing you to block areas you don't want monitored \u003c\/li\u003e\n\u003cli\u003eOperating frequency: 40kHz\u003c\/li\u003e\n\u003cli\u003eSmall unobtrusive profile: 4-1\/2\" diameter, 1.4\" height \u003c\/li\u003e\n\u003cli\u003eFlexible mounting base for quick and easy installation and aiming \u003c\/li\u003e\n\u003cli\u003eRequires 24VDC 33mA from a Leviton ODP series power pack (will not operate without a power pack). Power packs may be used with one or more motion sensors depending on the circuit design\u003c\/li\u003e\n\u003cli\u003eFast, simple installation using 3 color-coded low-voltage wires and a single mounting post\u003c\/li\u003e\n\u003cli\u003eIdeal for restrooms, office areas with cubicles, general work space, warehouse and storage facilities, cafeterias and public areas in commercial facilities \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085889315068,"sku":"LODC05-URW-EA","price":63.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LODC05-URW-EA-2.jpg?v=1778555003"},{"product_id":"leviton-odc05-mrw-white-dual-relay-180-ceiling-occupancy-motion-sensor-500sq-ft","title":"Leviton ODC05-MRW White Dual Relay 180? Ceiling Occupancy Motion Sensor 500sq ft","description":"Leviton ODC05-MRW white multi-technology ceiling-mount occupancy sensor. Please note that this type of sensor must be powered by a Leviton ODP series power pack. This is a high-end sensor with the ultimate in built-in self-learning technologies - install it and forget it - the sensor does the rest. The ability of this unit to observe, analyze and adjust is nothing short of astounding. Secondary relay can be used to send control signals to HVAC systems. Advanced motion sensor combines infrared and ultrasonic technology for highly accurate monitoring without false triggering. All-digital self-adjusting technology provides \"Install and Forget\" solution for automatic lighting control. Features include: \u003cul\u003e\n\u003cli\u003eIdeal for office areas with cubicles, general work space, warehouse and storage facilities, cafeterias and public areas in commercial facilities \u003c\/li\u003e\n\u003cli\u003eComposite sensing - combination of IR and ultrasonic sensors greatly reduces false triggers from items such as air conditiong and corridor activity\u003c\/li\u003e\n\u003cli\u003eSelf-adjusting settings continuously analyze and adjust IR sensitivity, timer operation, and air current compensations for reliable, long-term performance\u003c\/li\u003e\n\u003cli\u003eAutomatic dual-mode operation adjusts to either economy of high sensitivity mode based on actual occupancy patterns for maximum energy savings\u003c\/li\u003e\n\u003cli\u003eBuilt-in circadian calendar - provides 4-week learning period where the sensor monitors occupancy to establish trends that serve as the basis for automatic operation. During peak occupancy periods the sensor remains in high-sensitivity mode mode and during low occupancy periods it switches to economy mode \u003c\/li\u003e\n\u003cli\u003eAmbient light override option prevents lights from turning ON when there is ample natural light\u003c\/li\u003e\n\u003cli\u003eManual Delayed-OFF time settings of 8, 16, and 32 minutes, with 8-second test mode \u003c\/li\u003e\n\u003cli\u003eSecondary relay can be used to send control signals to HVAC systems based on occupancy detection \u003c\/li\u003e\n\u003cli\u003eSecondary relay: single-pole double-throw (SPDT), rated 500 mA @ 24V AC\/DC, three-wire isolated relay \u003c\/li\u003e\n\u003cli\u003eManual delayed-OFF time settings of 8, 16, and 32 minutes with 8 second test mode\u003c\/li\u003e\n\u003cli\u003e Self-adjusting delayed-OFF time interval settings for 8 to 100 minutes - compensates for real-time occupancy patterns, preventing unnecessary ON\/OFF switching\u003c\/li\u003e\n\u003cli\u003eNon-volatile memory preserves all automatic and manual settings during power outages \u003c\/li\u003e\n\u003cli\u003e500 square foot coverage, 180 degree field of view \u003c\/li\u003e\n\u003cli\u003eCustomizable masks provide a choice of coverage patterns, allowing you to block areas you don't want monitored \u003c\/li\u003e\n\u003cli\u003eOperating frequency: 32kHz\u003c\/li\u003e\n\u003cli\u003eSmall unobtrusive profile: 4-1\/2\" diameter, 1.4\" height \u003c\/li\u003e\n\u003cli\u003ePLEASE NOTE: This requires 24VDC 33mA from a Leviton ODP series power pack or compatible equivalent (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49085889249532,"sku":"LODC05-MRW-EA","price":41.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LODC05-MRW-EA-2.jpg?v=1778555003"},{"product_id":"leviton-nipple-adapters-for-low-voltage-occupancy-motion-sensor-odpna-10-pack","title":"Leviton Nipple Adapters for Low Voltage Occupancy Motion Sensor ODPNA 10-Pack","description":"10 Leviton ODPNA low-voltage nipple adapters with 1\/2\" lock nut. Designed for use with Leviton ODP Series Power Packs and ODA series Add-A-Relay units. Split-collar\/locknut design converts power packs and add-a-relays so that they have threaded fittings at both ends instead of just at one end. Simplifies the connection of occupancy sensor to the low-voltage side of a power pack mounted inside a fluorescent ballast cavity.","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086108598524,"sku":"LODPNA-10PK","price":4.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LODPNA-10PK-3.jpg?v=1778556283"},{"product_id":"hubbell-500w-120v-motion-detector-switch-w-dimming-60hz-illuminated","title":"Hubbell 500W 120V Motion Detector Switch w\/ Dimming, 60HZ Illuminated","description":"Hubbell RMS121ILI ivory occupacny switch with dimming adjustment and nightlight. An occupancy switch turns lights on when motion is detected and turns them off after a preset time. Great for locations where people are walking in\/out with their hands full or in households where those who do not pay the electric bill are forgetful about turning lights off. Residential grade, single pole, rated 500W 120VAC - for use with incandescent lighting only - will not work with LED or CFL lights. Requires a minimum load of 25W to operate. Features include:\u003cul\u003e\n\u003cli\u003eAuto-on, auto-off occupancy sensor: lights are turned on automatically when motion is detected and turn off automatically after a preset time \u003c\/li\u003e\n\u003cli\u003eFor use with incandescent lighting only - will not work with LED, fluorescent, or CFL lights \u003c\/li\u003e\n\u003cli\u003eRequires 25W minimum load \u003c\/li\u003e\n\u003cli\u003eDimming feature - slide control on left side of ON\/OFF button allows for precise control of light levels \u003c\/li\u003e\n\u003cli\u003eCoverage: 800 square feet; 150 degree view \u003c\/li\u003e\n\u003cli\u003eNightlight feature \u003c\/li\u003e\n\u003cli\u003ePhotocell equipped for daylight harvesting - does not turn on lights when there is adequate ambient light\u003c\/li\u003e\n\u003cli\u003ePassive infrared sensing technology \u003c\/li\u003e\n\u003cli\u003ePatent pending �alert to off� feature dims lights prior to off; if motion is sensed within 30 seconds, the unit returns to full brightness\u003c\/li\u003e\n\u003cli\u003eDelayed off, adjusts from 30 seconds to 30 minutes \u003c\/li\u003e\n\u003cli\u003eDurable thermoplastic construction \u003c\/li\u003e\n\u003cli\u003eLED motion detector indicator \u003c\/li\u003e\n\u003cli\u003e6-inch wire lead terminations \u003c\/li\u003e\n\u003cli\u003eNo neutral required\u003c\/li\u003e\n\u003cli\u003ePassive infrared technology\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086120919292,"sku":"HUBRMS121ILI-EA","price":17.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBRMS121ILI-EA-2.jpg?v=1778556389"},{"product_id":"hubbell-light-almond-occupancy-sensor-no-neutral-2-circuit-pir-120vac-ws1020la","title":"Hubbell Light Almond Occupancy Sensor No Neutral 2-Circuit PIR 120VAC WS1020LA","description":"Hubbell WS1020LA light almond occupancy sensor with manual override. Designed to turn ON when you are there, and OFF when you're not; adjustable for delayed off. Features include:\u003cul\u003e\n\u003cli\u003eAuto-ON; Auto-OFF \u003c\/li\u003e\n\u003cli\u003eLoad capacity: 120VAC, 600W incandescent, 5A ballast, 5A CFL\/LED; 1\/6 horsepower rating \u003c\/li\u003e\n\u003cli\u003e1200 sq. ft coverage area \u003c\/li\u003e\n\u003cli\u003eFront button switches for manual ON\/OFF control \u003c\/li\u003e\n\u003cli\u003eAdjustable time off delay: 6 seconds to 20 minutes (default set to 10 minutes) \u003c\/li\u003e\n\u003cli\u003eCan control 2 circuits \u003c\/li\u003e\n\u003cli\u003eDesigned for use on 120 AC circuits, no neutral required for fast retrofits\u003c\/li\u003e\n\u003cli\u003eManual adjusting, auto ON operation \u003c\/li\u003e\n\u003cli\u003eWallplate purchased separately \u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086218305788,"sku":"HUBWS1020LA-EA","price":19.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBWS1020LA-EA-G.jpg?v=1778557247"},{"product_id":"hubbell-ws1021ngy-gray-vacancy-sensor-switch-w-nightlight-no-neutral-2-circuit","title":"Hubbell WS1021NGY Gray Vacancy Sensor Switch w\/Nightlight No Neutral 2-Circuit","description":"Hubbell WS1021NGY gray vacancy sensor with night light and manual override. Vacancy sensors are turned on like an ordinary switch, but automatically turn lights off; adjustable for delayed off. Features include:\u003cul\u003e\n\u003cli\u003eManual-ON; Auto-OFF \u003c\/li\u003e\n\u003cli\u003eLoad capacity: 120VAC, 600W incandescent, 5A ballast, 5A CFL\/LED; 1\/6 horsepower rating \u003c\/li\u003e\n\u003cli\u003e1200 sq. ft coverage area \u003c\/li\u003e\n\u003cli\u003eFront button switches for manual ON\/OFF control \u003c\/li\u003e\n\u003cli\u003eAdjustable time off delay: 6 seconds to 20 minutes (default set to 10 minutes) \u003c\/li\u003e\n\u003cli\u003eCan control 2 circuits \u003c\/li\u003e\n\u003cli\u003eDesigned for use on 120V \u003c\/li\u003e\n\u003cli\u003eNo neutral required \u003c\/li\u003e\n\u003cli\u003eWallplate purchased separately \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Gray","offer_id":49086218699004,"sku":"HUBWS1021NGY-EA","price":20.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBWS1021NGY-EA-2.jpg?v=1778557269"},{"product_id":"hubbell-ivory-vacancy-sensor-wall-light-switch-no-neutral-pir-120vac-ws1021i","title":"Hubbell Ivory Vacancy Sensor Wall Light Switch No Neutral PIR 120VAC WS1021I","description":"Hubbell WS1021I ivory vacancy sensor with manual override. Vacancy sensors are turned on like an ordinary switch, but automatically turn lights off; adjustable for delayed off. Features include:\u003cul\u003e\n\u003cli\u003eManual-ON; Auto-OFF \u003c\/li\u003e\n\u003cli\u003eLoad capacity: 120VAC, 600W incandescent, 5A ballast, 5A CFL\/LED; 1\/6 horsepower rating \u003c\/li\u003e\n\u003cli\u003e1200 sq. ft coverage area \u003c\/li\u003e\n\u003cli\u003eFront button switches for manual ON\/OFF control \u003c\/li\u003e\n\u003cli\u003eAdjustable time off delay: 6 seconds to 20 minutes (default set to 10 minutes) \u003c\/li\u003e\n\u003cli\u003eCan control 2 circuits \u003c\/li\u003e\n\u003cli\u003eDesigned for use on 120 AC circuits, no neutral required for fast retrofits \u003c\/li\u003e\n\u003cli\u003eWallplate purchased separately \u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Ivory","offer_id":49086218666236,"sku":"HUBWS1021I-EA","price":18.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBWS1021I-EA-G.jpg?v=1778557263"},{"product_id":"hubbell-wall-mount-wireless-2-relay-control-unit-loadlogic-120-277v-20a-wlc402w","title":"Hubbell Wall Mount Wireless 2-Relay Control Unit LoadLogic 120\/277V 20A WLC402W","description":"Hubbell WLC402W white wall-mount wireless control unit. Controls 2 independent circuits for furniture electrical feeds. Used for: Hubbell H-MOSS systems, Hubbell Load:Logic systems, and Lutron Clear Connect integrations. Features include:\u003cul\u003e\n\u003cli\u003eSelf-contained wall unit which mounts to single or double gang boxes; can also be secured to furniture or floor \u003c\/li\u003e\n\u003cli\u003eRated 120\/277V 20A\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo circuit 20 amp relay to switch circuits for multiple load controls \u003c\/li\u003e\n\u003cli\u003eReceives input from up to 10 wireless transmitters \u003c\/li\u003e\n\u003cli\u003eFail to \"ON\" if paired transmitter goes missing \u003c\/li\u003e\n\u003cli\u003eRange: 30 ft. (standard\/obstructed); 60 ft. (unobstructed line of site) \u003c\/li\u003e\n\u003cli\u003eLoad capacity: 20A, 100-277V; 1HP @ 120V AC; 2HP @ 240\/277V \u003c\/li\u003e\n\u003cli\u003eRelay: Heavy duty; magnetic latching. Silver alloy contacts. Very low standby power consumption \u003c\/li\u003e\n\u003cli\u003eLutron Clear Connect enabled \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086218731772,"sku":"HUBWLC402W-EA","price":173.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBWLC402W-EA-G.jpg?v=1778557269"},{"product_id":"hubbell-gray-occupancy-sensor-switch-w-nightlight-no-neutral-2-circuit-ws1020ngy","title":"Hubbell Gray Occupancy Sensor Switch w\/Nightlight No Neutral 2-Circuit WS1020NGY","description":"Hubbell WS1020NGY gray occupancy sensor with night light and manual override. Designed to turn ON when you are there, and OFF when you're not; adjustable for delayed off. Features include:\u003cul\u003e\n\u003cli\u003eNightlight version to provide illumination when the lights are OFF, no neutral required \u003c\/li\u003e\n\u003cli\u003eAuto-ON; Auto-OFF \u003c\/li\u003e\n\u003cli\u003eLoad capacity: 120VAC, 600W incandescent, 5A ballast, 5A CFL\/LED; 1\/6 horsepower rating \u003c\/li\u003e\n\u003cli\u003e1200 sq. ft coverage area \u003c\/li\u003e\n\u003cli\u003eFront button switches for manual ON\/OFF control \u003c\/li\u003e\n\u003cli\u003eAdjustable time off delay: 6 seconds to 20 minutes (default set to 10 minutes) \u003c\/li\u003e\n\u003cli\u003eCan control 2 circuits \u003c\/li\u003e\n\u003cli\u003eDesigned for use on 120 AC circuits, no neutral required for fast retrofits\u003c\/li\u003e\n\u003cli\u003eManual adjusting, auto ON operation \u003c\/li\u003e\n\u003cli\u003eWallplate purchased separately \u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Gray","offer_id":49086218797308,"sku":"HUBWS1020NGY-EA","price":13.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBWS1020NGY-EA-G.jpg?v=1778557274"},{"product_id":"hubbell-ws1021nla-lt-almond-vacancy-sensor-switch-w-nightlight-no-neutral-2-cir","title":"Hubbell WS1021NLA Lt Almond Vacancy Sensor Switch w\/Nightlight No Neutral 2-Cir","description":"Hubbell WS1021NLA light almond vacancy sensor with night light and manual override. Vacancy sensors are turned on like an ordinary switch, but automatically turn lights off; adjustable for delayed off. Features include:\u003cul\u003e\n\u003cli\u003eManual-ON; Auto-OFF \u003c\/li\u003e\n\u003cli\u003eLoad capacity: 120VAC, 600W incandescent, 5A ballast, 5A CFL\/LED; 1\/6 horsepower rating \u003c\/li\u003e\n\u003cli\u003e1200 sq. ft coverage area \u003c\/li\u003e\n\u003cli\u003eFront button switches for manual ON\/OFF control \u003c\/li\u003e\n\u003cli\u003eAdjustable time off delay: 6 seconds to 20 minutes (default set to 10 minutes) \u003c\/li\u003e\n\u003cli\u003eCan control 2 circuits \u003c\/li\u003e\n\u003cli\u003eDesigned for use on 120 VAC circuits \u003c\/li\u003e\n\u003cli\u003eNo neutral requireds \u003c\/li\u003e\n\u003cli\u003eWallplate purchased separately \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Almond","offer_id":49086219059452,"sku":"HUBWS1021NLA-EA","price":20.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBWS1021NLA-EA-2.jpg?v=1778557274"},{"product_id":"hubbell-ws1024la-light-almond-occupancy-sensor-neutral-reqd-2-circuit-pir-120vac","title":"Hubbell WS1024LA Light Almond Occupancy Sensor Neutral Reqd 2-Circuit PIR 120VAC","description":"Hubbell WS1024LA light almond occupancy sensor with manual override. \u003cu\u003ePlease note: this requires an existing neutral wire in the box that it is being installed in, so please check before ordering this.\u003c\/u\u003e Designed to turn ON when you are there, and OFF when you�re not; adjustable for delayed off. Features include:\u003cul\u003e\n\u003cli\u003eAuto-ON; Auto-OFF \u003c\/li\u003e\n\u003cli\u003eLoad capacity: 120VAC, 600W incandescent, 5A ballast, 5A CFL\/LED; 1\/6 horsepower rating \u003c\/li\u003e\n\u003cli\u003e1200 sq. ft coverage area \u003c\/li\u003e\n\u003cli\u003eFront button switches for manual ON\/OFF control \u003c\/li\u003e\n\u003cli\u003eAdjustable time off delay: 6 seconds to 20 minutes (default set to 10 minutes) \u003c\/li\u003e\n\u003cli\u003eCan control 2 circuits \u003c\/li\u003e\n\u003cli\u003eDesigned for use on 120 AC circuits. \u003cu\u003eA neutral wire is required. This will not work if you do not have an existing neutral wire in your wallbox so please check before ordering\u003cu\u003e \u003cli\u003eManual adjusting, auto ON operation \u003c\/li\u003e\n\u003cli\u003eWallplate purchased separately \u003c\/li\u003e\n\u003cli\u003e\u003c\/u\u003e\u003c\/u\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086219321596,"sku":"HUBWS1024LA-EA","price":12.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBWS1024LA-EA-G.jpg?v=1778557286"},{"product_id":"hubbell-rms120illa-lt-almond-pir-vacancy-sensor-switch-w-dimming-nightlight","title":"Hubbell RMS120ILLA Lt Almond PIR Vacancy Sensor Switch w\/Dimming \u0026 Nightlight","description":"Hubbell RMS120ILLA light almond vacancy switch with dimming adjustment and nightlight. A vacancy switch is turned on manually and then automatically turns them off after a preset time. Great for locations where people are walking out with their hands full or in households where those who do not pay the electric bill are forgetful about turning lights off. Residential grade, single pole, rated 500W 120VAC - fo use with incandescent lighting only - will not work with LED or CFL lights. Requires a minimum load of 25W to operate. Features include:\u003cul\u003e\n\u003cli\u003eManual-on, auto-off vacancy sensor: lights are turned on manually and turn off automatically after a preset time \u003c\/li\u003e\n\u003cli\u003eFor use with incandescent lighting only - will not work with LED, fluorescent, or CFL lights \u003c\/li\u003e\n\u003cli\u003eRequires 25W minimum load \u003c\/li\u003e\n\u003cli\u003eDimming feature - slide control on left side of ON\/OFF button allows for precise control of light levels \u003c\/li\u003e\n\u003cli\u003eCoverage: 800 square feet; 150 degree view \u003c\/li\u003e\n\u003cli\u003eNightlight feature\u003c\/li\u003e\n\u003cli\u003ePassive infrared sensing technology \u003c\/li\u003e\n\u003cli\u003ePatent pending �alert to off� feature dims lights prior to off; if motion is sensed within 30 seconds, the unit returns to full brightness\u003c\/li\u003e\n\u003cli\u003eDelayed off, adjusts from 30 seconds to 30 minutes \u003c\/li\u003e\n\u003cli\u003eDurable thermoplastic construction \u003c\/li\u003e\n\u003cli\u003eLED motion detector indicator \u003c\/li\u003e\n\u003cli\u003e6-inch wire lead terminations \u003c\/li\u003e\n\u003cli\u003eNo neutral required\u003c\/li\u003e\n\u003cli\u003ePassive infrared technology\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Almond","offer_id":49086220402940,"sku":"HUBRMS120ILLA-EA","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBRMS120ILLA-EA-2.jpg?v=1778557329"},{"product_id":"hubbell-rms120ili-ivory-pir-vacancy-sensor-wall-switch-w-dimming-nightlight","title":"Hubbell RMS120ILI Ivory PIR Vacancy Sensor Wall Switch w\/Dimming \u0026 Nightlight","description":"Hubbell RMS120ILI ivory vacancy switch with dimming adjustment and nightlight. A vacancy switch is turned on manually and then automatically turns them off after a preset time. Great for locations where people are walking out with their hands full or in households where those who do not pay the electric bill are forgetful about turning lights off. Residential grade, single pole, rated 500W 120VAC - fo use with incandescent lighting only - will not work with LED or CFL lights. Requires a minimum load of 25W to operate. Features include:\u003cul\u003e\n\u003cli\u003eManual-on, auto-off vacancy sensor: lights are turned on manually and turn off automatically after a preset time \u003c\/li\u003e\n\u003cli\u003eFor use with incandescent lighting only - will not work with LED, fluorescent, or CFL lights \u003c\/li\u003e\n\u003cli\u003eRequires 25W minimum load \u003c\/li\u003e\n\u003cli\u003eDimming feature - slide control on left side of ON\/OFF button allows for precise control of light levels \u003c\/li\u003e\n\u003cli\u003eCoverage: 800 square feet; 150 degree view \u003c\/li\u003e\n\u003cli\u003eNightlight feature\u003c\/li\u003e\n\u003cli\u003ePassive infrared sensing technology \u003c\/li\u003e\n\u003cli\u003ePatent pending �alert to off� feature dims lights prior to off; if motion is sensed within 30 seconds, the unit returns to full brightness\u003c\/li\u003e\n\u003cli\u003eDelayed off, adjusts from 30 seconds to 30 minutes \u003c\/li\u003e\n\u003cli\u003eDurable thermoplastic construction \u003c\/li\u003e\n\u003cli\u003eLED motion detector indicator \u003c\/li\u003e\n\u003cli\u003e6-inch wire lead terminations \u003c\/li\u003e\n\u003cli\u003eNo neutral required\u003c\/li\u003e\n\u003cli\u003ePassive infrared technology\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Ivory","offer_id":49086220501244,"sku":"HUBRMS120ILI-EA","price":16.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBRMS120ILI-EA-2.jpg?v=1778557322"},{"product_id":"nuvo-65-092-led-security-light-4000k-single-head-motion-sensor-bronze-finish","title":"Nuvo 65-092 LED Security Light 4000K Single Head Motion Sensor Bronze Finish","description":"Nuvo 65-092 LED Security Light 4000K Single Head Motion Sensor Bronze Finish","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086535172348,"sku":"SAT65\/092-EA","price":27.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/SAT65092-EA-2.jpg?v=1778560910"},{"product_id":"tork-2003-turn-lock-mounting-photocontrol-photoelectrical-control","title":"Tork 2003 Turn-Lock Mounting Photocontrol Photoelectrical Control","description":"Features include: \u003cul\u003e\n\u003cli\u003eMeets stringent utility standards for street \u0026amp; highway lighting \u003c\/li\u003e\n\u003cli\u003eComplies with ANSI C136.10 and EEI NEMA Standards \u003c\/li\u003e\n\u003cli\u003eDelayed response prevents false switching due to light from vehicles, lighting, etc\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086538318076,"sku":"TRK2003-EA","price":21.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/TRK2003-EA-2.jpg?v=1778560996"},{"product_id":"kidde-21010071-p3010k-co-smoke-carbon-monoxide-alarm-lithium-battery-operated","title":"Kidde 21010071 P3010K-CO Smoke Carbon Monoxide Alarm Lithium Battery Operated","description":"Features include: \u003cul\u003e\n\u003cli\u003eCombination Smoke and Carbon Monoxide Alarm Smoke and CO sensing technologies work together to detect real fires faster and reduce cooking-related nuisance alarms \u003c\/li\u003e\n\u003cli\u003eSealed-In Lithium Battery Sealed-in lithium power supply; no battery replacement required over the 10 year life of the alarm. Eliminates worry about battery removal or unauthorized deactivation of alarm \u003c\/li\u003e\n\u003cli\u003ePhotoelectric Sensor Smoke alarm contains advanced photoelectric sensor that may detect visible particles (associated with smoldering fires) sooner than ionization alarms \u003c\/li\u003e\n\u003cli\u003eSelf Activation Alarm automatically activates when attached to the mounting bracket \u003c\/li\u003e\n\u003cli\u003eAlarm Memory Rapidly flashing LED alerts user if the alarm has sounded since the last time the test\/reset button was used \u003c\/li\u003e\n\u003cli\u003eTest\/Hush Button Tests alarm circuitry and activates Hush features \u003c\/li\u003e\n\u003cli\u003eSmart HushTM Temporarily silences nuisance alarms for approximately 10 minutes and will not allow hush mode unless the unit is in alarm mode \u003c\/li\u003e\n\u003cli\u003eLED Red LED will blink in conjunction with the alarm sound \u003c\/li\u003e\n\u003cli\u003eEnd of Life Warning Alarm chirps every 30 seconds to indicate the unit is in need of replacement \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086547198204,"sku":"KID21010071-EA","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/KID21010071-EA-2.jpg?v=1778561175"},{"product_id":"leviton-177oc-scene-select-occupancy-motion-sensor-control-bridge-no-load-rating","title":"Leviton 177OC Scene Select Occupancy Motion Sensor Control Bridge No LOAD Rating","description":"Leviton 177OC scene select occupancy sensor control bridge. Operates Leviton Scene Capable devices in conjunction with a Leviton occupancy sensor. See wiring diagrams included with the additional photos for some typical installations.","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086714609916,"sku":"L177OC-EA","price":11.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/L177OC-EA-2.jpg?v=1778563086"},{"product_id":"hubbell-ad2000i2u-ivory-occupancy-sensor-switch-adaptive-pir-us-2-circuit","title":"Hubbell AD2000I2U Ivory Occupancy Sensor Switch Adaptive PIR\/US 2 Circuit","description":"Hubbell AD2000I2U ivory 2-circuit occupancy sensor switch. The \"U\" suffix on this part number means that it complies with Made in America requirements under certain government programs. Dual relay sensor allows control of 2 load circuits. Typical uses include: controlling lights and a fan with different time off delay settings; or controlling a larger room with two banks of lighting (border\/mood and center\/task lighting) that require different time off delay settings. Equipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor�s sensitivity and timer settings to optimize performance based on occupancy patterns. The sensor constantly learns and adjusts appropriately. Features include:\u003cul\u003e\n\u003cli\u003eNo neutral required \u003c\/li\u003e\n\u003cli\u003eSingle pole \u003c\/li\u003e\n\u003cli\u003eVacancy mode option - can be set to turn on automatically when motion is detected or to turn on only when the manual ON\/OFF switch is pressed  \u003c\/li\u003e\n\u003cli\u003eEquipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor's sensitivity and timer settings to optimize performance based on occupancy patterns.  \u003c\/li\u003e\n\u003cli\u003eManual or adaptive time delay - the amount of time that the switch will keep the lights on after motion is no longer detected can be set manually (4-30 minutes) or automatically using the built-in Intelli-DAPT technology\u003c\/li\u003e\n\u003cli\u003eCoverage: 1,000 square feet \u003c\/li\u003e\n\u003cli\u003eLoad ratings: 5A LED; 800W incandescent @ 120V; 1000W fluorescent @ 120V; 1800W fluorescent @ 277V; 1\/6 HP @ 120\/277V \u003c\/li\u003e\n\u003cli\u003eDual tech sensor - combines the individual advantages of passive infrared and ultrasonic detection. Once occupancy is detected by both technologies within the space lights are turned ON, only one technology is necessary to keep the lights ON \u003c\/li\u003e\n\u003cli\u003eBuilt in photocell with manual super saver mode for daylight harvesting - assures that lights are only on while ambient light levels require it; range can be set to 10-500 foot candles \u003c\/li\u003e\n\u003cli\u003eImpact resistant hard lens is standard and color matched to the switch\u003c\/li\u003e\n\u003cli\u003eFits standard decorator\/GFCI style wallplates (purchased separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Ivory","offer_id":49086726406396,"sku":"HUBAD2000I2U-EA","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBAD2000I2U-EA-2.jpg?v=1778563396"},{"product_id":"hubbell-ad2240gy2-gray-occupancy-sensor-switch-low-voltage-pir-us-2circuit-24vdc","title":"Hubbell AD2240GY2 Gray Occupancy Sensor Switch Low Voltage PIR\/US 2Circuit 24VDC","description":"Hubbell AD2240GY2 gray 2-circuit low voltage 24VDC occupancy sensor switch; requires Hubbell CU300xx series control units (purchased separately). Dual relay sensor allows control of 2 load circuits. Offers an energy savings solution for use with lighting, HVAC and to comply with Automatic Receptacle Control. The sensor operates with a control unit (purchased separately) enabling line voltage and low voltage wiring to be easily separated. This makes for an ideal cost effective solution when used in smaller spaces such as private offices, conference rooms and restrooms. Equipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor�s sensitivity and timer settings to optimize performance based on occupancy patterns. The sensor constantly learns and adjusts appropriately. Features include:\u003cul\u003e\n\u003cli\u003e24VDC low voltage sensor; requires Hubbell CU300xx series control units to operate \u003c\/li\u003e\n\u003cli\u003eSingle pole \u003c\/li\u003e\n\u003cli\u003eVacancy mode option - can be set to turn on automatically when motion is detected or to turn on only when the manual ON\/OFF switch is pressed  \u003c\/li\u003e\n\u003cli\u003eEquipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor's sensitivity and timer settings to optimize performance based on occupancy patterns.  \u003c\/li\u003e\n\u003cli\u003eManual or adaptive time delay - the amount of time that the switch will keep the lights on after motion is no longer detected can be set manually (4\/8\/15\/30 minutes) or automatically using the built-in Intelli-DAPT technology\u003c\/li\u003e\n\u003cli\u003eCoverage: 1,000 square feet \u003c\/li\u003e\n\u003cli\u003eSensor has no load rating; circuit load rating is determined by the control units that you are using \u003c\/li\u003e\n\u003cli\u003eDual tech sensor - combines the individual advantages of passive infrared and ultrasonic detection. Once occupancy is detected by both technologies within the space lights are turned ON, only one technology is necessary to keep the lights ON \u003c\/li\u003e\n\u003cli\u003eBuilt in photocell with manual super saver mode for daylight harvesting - assures that lights are only on while ambient light levels require it; range can be set to 10-500 foot candles \u003c\/li\u003e\n\u003cli\u003eImpact resistant hard lens is standard and color matched to the switch\u003c\/li\u003e\n\u003cli\u003eFits standard decorator\/GFCI style wallplates (purchased separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Gray","offer_id":49086726701308,"sku":"HUBAD2240GY2-EA","price":63.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBAD2240GY2-EA-G.jpg?v=1778563407"},{"product_id":"hubbell-gray-occupancy-sensor-switch-adaptive-pir-us-2circuit-120-277v-ad2000gy2","title":"Hubbell Gray Occupancy Sensor Switch Adaptive PIR\/US 2Circuit 120\/277V AD2000GY2","description":"Hubbell AD2000GY2 gray 2-circuit occupancy sensor switch. Dual relay sensor allows control of 2 load circuits. Typical uses include: controlling lights and a fan with different time off delay settings; or controlling a larger room with two banks of lighting (border\/mood and center\/task lighting) that require different time off delay settings. Equipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor�s sensitivity and timer settings to optimize performance based on occupancy patterns. The sensor constantly learns and adjusts appropriately. Features include:\u003cul\u003e\n\u003cli\u003eNo neutral required \u003c\/li\u003e\n\u003cli\u003eSingle pole \u003c\/li\u003e\n\u003cli\u003eVacancy mode option - can be set to turn on automatically when motion is detected or to turn on only when the manual ON\/OFF switch is pressed  \u003c\/li\u003e\n\u003cli\u003eEquipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor's sensitivity and timer settings to optimize performance based on occupancy patterns.  \u003c\/li\u003e\n\u003cli\u003eManual or adaptive time delay - the amount of time that the switch will keep the lights on after motion is no longer detected can be set manually (4-30 minutes) or automatically using the built-in Intelli-DAPT technology\u003c\/li\u003e\n\u003cli\u003eCoverage: 1,000 square feet \u003c\/li\u003e\n\u003cli\u003eLoad ratings: 5A LED; 800W incandescent @ 120V; 1000W fluorescent @ 120V; 1800W fluorescent @ 277V; 1\/6 HP @ 120\/277V \u003c\/li\u003e\n\u003cli\u003eDual tech sensor - combines the individual advantages of passive infrared and ultrasonic detection. Once occupancy is detected by both technologies within the space lights are turned ON, only one technology is necessary to keep the lights ON \u003c\/li\u003e\n\u003cli\u003eBuilt in photocell with manual super saver mode for daylight harvesting - assures that lights are only on while ambient light levels require it; range can be set to 10-500 foot candles \u003c\/li\u003e\n\u003cli\u003eImpact resistant hard lens is standard and color matched to the switch\u003c\/li\u003e\n\u003cli\u003eFits standard decorator\/GFCI style wallplates (purchased separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Gray","offer_id":49086726570236,"sku":"HUBAD2000GY2U-EA","price":68.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBAD2000GY2U-EA-2.jpg?v=1778563401"},{"product_id":"hubbell-ad2240i2-ivory-occupancy-sensor-switch-low-voltage-pir-us-2circuit-24vdc","title":"Hubbell AD2240I2 Ivory Occupancy Sensor Switch Low Voltage PIR\/US 2Circuit 24VDC","description":"Hubbell AD2240I2 ivory 2-circuit low voltage 24VDC occupancy sensor switch; requires Hubbell CU300xx series control units (purchased separately). Dual relay sensor allows control of 2 load circuits. Offers an energy savings solution for use with lighting, HVAC and to comply with Automatic Receptacle Control. The sensor operates with a control unit (purchased separately) enabling line voltage and low voltage wiring to be easily separated. This makes for an ideal cost effective solution when used in smaller spaces such as private offices, conference rooms and restrooms. Equipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor�s sensitivity and timer settings to optimize performance based on occupancy patterns. The sensor constantly learns and adjusts appropriately. Features include:\u003cul\u003e\n\u003cli\u003e24VDC low voltage sensor; requires Hubbell CU300xx series control units to operate \u003c\/li\u003e\n\u003cli\u003eSingle pole \u003c\/li\u003e\n\u003cli\u003eVacancy mode option - can be set to turn on automatically when motion is detected or to turn on only when the manual ON\/OFF switch is pressed  \u003c\/li\u003e\n\u003cli\u003eEquipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor's sensitivity and timer settings to optimize performance based on occupancy patterns.  \u003c\/li\u003e\n\u003cli\u003eManual or adaptive time delay - the amount of time that the switch will keep the lights on after motion is no longer detected can be set manually (4\/8\/15\/30 minutes) or automatically using the built-in Intelli-DAPT technology\u003c\/li\u003e\n\u003cli\u003eCoverage: 1,000 square feet \u003c\/li\u003e\n\u003cli\u003eSensor has no load rating; circuit load rating is determined by the control units that you are using \u003c\/li\u003e\n\u003cli\u003eDual tech sensor - combines the individual advantages of passive infrared and ultrasonic detection. Once occupancy is detected by both technologies within the space lights are turned ON, only one technology is necessary to keep the lights ON \u003c\/li\u003e\n\u003cli\u003eBuilt in photocell with manual super saver mode for daylight harvesting - assures that lights are only on while ambient light levels require it; range can be set to 10-500 foot candles \u003c\/li\u003e\n\u003cli\u003eImpact resistant hard lens is standard and color matched to the switch\u003c\/li\u003e\n\u003cli\u003eFits standard decorator\/GFCI style wallplates (purchased separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Ivory","offer_id":49086726832380,"sku":"HUBAD2240I2-EA","price":63.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBAD2240I2-EA-G.jpg?v=1778563407"},{"product_id":"hubbell-gray-vacancy-sensor-switch-adaptive-pir-us-120-277v-1000ft-ad2001gy1","title":"Hubbell Gray Vacancy Sensor Switch Adaptive PIR\/US 120\/277V 1000ft? AD2001GY1","description":"Hubbell AD2001GY1 gray vacancy sensor switch. A vacancy switch is designed to be turned ON manually and then turns OFF automatically a preset time after motion has ceased. Vacancy switches have greater savings over occupancy sensors because lights are only turned on when the user needs them. Typical uses are: classrooms, conference rooms, break rooms, storage rooms, printing rooms, private offices, restrooms, and dressing rooms. Equipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor�s sensitivity and timer settings to optimize performance based on occupancy patterns. The sensor constantly learns and adjusts appropriately. Features include:\u003cul\u003e\n\u003cli\u003eNo neutral required \u003c\/li\u003e\n\u003cli\u003eSingle pole \u003c\/li\u003e\n\u003cli\u003eVacancy sensor - lights must be turned ON manually using the switch on the face and will turn OFF automatically a preset time (4-30 minutes) after motion ceases \u003c\/li\u003e\n\u003cli\u003eEquipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor's sensitivity and timer settings to optimize performance based on occupancy patterns.  \u003c\/li\u003e\n\u003cli\u003eManual or adaptive time delay - the amount of time that the switch will keep the lights on after motion is no longer detected can be set manually (4-30 minutes) or automatically using the built-in Intelli-DAPT technology\u003c\/li\u003e\n\u003cli\u003eCoverage: 1,000 square feet \u003c\/li\u003e\n\u003cli\u003eLoad ratings: 5A LED; 800W incandescent @ 120V; 1000W fluorescent @ 120V; 1800W fluorescent @ 277V; 1\/6 HP @ 120\/277V \u003c\/li\u003e\n\u003cli\u003eDual tech sensor - combines the individual advantages of passive infrared and ultrasonic detection. Once occupancy is detected by both technologies within the space lights are turned ON, only one technology is necessary to keep the lights ON \u003c\/li\u003e\n\u003cli\u003eBuilt in photocell with manual super saver mode for daylight harvesting - assures that lights are only on while ambient light levels require it; range can be set to 10-500 foot candles \u003c\/li\u003e\n\u003cli\u003eImpact resistant hard lens is standard and color matched to the switch\u003c\/li\u003e\n\u003cli\u003eFits standard decorator\/GFCI style wallplates (purchased separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Gray","offer_id":49086726865148,"sku":"HUBAD2001GY1-EA","price":54.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBAD2001GY1-EA-2.jpg?v=1778563407"},{"product_id":"hubbell-ad2241gy1-gray-vacancy-sensor-switch-low-voltage-adaptive-pir-us-24vdc","title":"Hubbell AD2241GY1 Gray Vacancy Sensor Switch Low Voltage Adaptive PIR\/US 24VDC","description":"Hubbell AD2241GY1 gray vacancy sensor switch; requires Hubbell CU300xx series control units (purchased separately). A vacancy switch is designed to be turned ON manually and then turns OFF automatically a preset time after motion has ceased. Vacancy switches have greater savings over occupancy sensors because lights are only turned on when the user needs them. Offers an energy savings solution for use with lighting, HVAC and to comply with Automatic Receptacle Control. The sensor operates with a control unit (purchased separately) enabling line voltage and low voltage wiring to be easily separated. This makes for an ideal cost effective solution when used in smaller spaces such as private offices, conference rooms and restrooms. Equipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor�s sensitivity and timer settings to optimize performance based on occupancy patterns. The sensor constantly learns and adjusts appropriately. Features include:\u003cul\u003e\n\u003cli\u003e24VDC low voltage sensor; requires Hubbell CU300xx series control units to operate \u003c\/li\u003e\n\u003cli\u003eSingle pole \u003c\/li\u003e\n\u003cli\u003eVacancy sensor - lights must be turned ON manually using the switch on the face and will turn OFF automatically a preset time (4-30 minutes) after motion ceases \u003c\/li\u003e\n\u003cli\u003eEquipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor's sensitivity and timer settings to optimize performance based on occupancy patterns.  \u003c\/li\u003e\n\u003cli\u003eManual or adaptive time delay - the amount of time that the switch will keep the lights on after motion is no longer detected can be set manually (4\/8\/15\/30 minutes) or automatically using the built-in Intelli-DAPT technology\u003c\/li\u003e\n\u003cli\u003eCoverage: 1,000 square feet \u003c\/li\u003e\n\u003cli\u003eLoad ratings: 5A LED; 800W incandescent @ 120V; 1000W fluorescent @ 120V; 1800W fluorescent @ 277V; 1\/6 HP @ 120\/277V \u003c\/li\u003e\n\u003cli\u003eDual tech sensor - combines the individual advantages of passive infrared and ultrasonic detection. Once occupancy is detected by both technologies within the space lights are turned ON, only one technology is necessary to keep the lights ON \u003c\/li\u003e\n\u003cli\u003eBuilt in photocell with manual super saver mode for daylight harvesting - assures that lights are only on while ambient light levels require it; range can be set to 10-500 foot candles \u003c\/li\u003e\n\u003cli\u003eImpact resistant hard lens is standard and color matched to the switch\u003c\/li\u003e\n\u003cli\u003eFits standard decorator\/GFCI style wallplates (purchased separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Gray","offer_id":49086727225596,"sku":"HUBAD2241GY1-EA","price":50.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBAD2241GY1-EA-G.jpg?v=1778563412"},{"product_id":"hubbell-ad2001la22-lt-almond-vacancy-sensor-switch-adaptive-pir-us-2-circuit","title":"Hubbell AD2001LA22 Lt Almond Vacancy Sensor Switch Adaptive PIR\/US 2 Circuit","description":"Hubbell AD2001LA22 light almond 2-circuit vacancy sensor switch. A vacancy switch is designed to be turned ON manually and then turns OFF automatically a preset time after motion has ceased. Vacancy switches have greater savings over occupancy sensors because lights are only turned on when the user needs them. Dual relay sensor allows control of 2 load circuits. Typical uses include: controlling lights and a fan with different time off delay settings; or controlling a larger room with two banks of lighting (border\/mood and center\/task lighting) that require different time off delay settings. Equipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor�s sensitivity and timer settings to optimize performance based on occupancy patterns. The sensor constantly learns and adjusts appropriately. Features include:\u003cul\u003e\n\u003cli\u003eNo neutral required \u003c\/li\u003e\n\u003cli\u003eSingle pole\u003c\/li\u003e\n\u003cli\u003eVacancy sensor - lights must be turned ON manually using the switch on the face and will turn OFF automatically a preset time (4-30 minutes) after motion ceases \u003c\/li\u003e\n\u003cli\u003eEquipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor's sensitivity and timer settings to optimize performance based on occupancy patterns.  \u003c\/li\u003e\n\u003cli\u003eManual or adaptive time delay - the amount of time that the switch will keep the lights on after motion is no longer detected can be set manually (4-30 minutes) or automatically using the built-in Intelli-DAPT technology\u003c\/li\u003e\n\u003cli\u003eCoverage: 1,000 square feet \u003c\/li\u003e\n\u003cli\u003eLoad ratings: 5A LED; 800W incandescent @ 120V; 1000W fluorescent @ 120V; 1800W fluorescent @ 277V; 1\/6 HP @ 120\/277V \u003c\/li\u003e\n\u003cli\u003eDual tech sensor - combines the individual advantages of passive infrared and ultrasonic detection. Once occupancy is detected by both technologies within the space lights are turned ON, only one technology is necessary to keep the lights ON \u003c\/li\u003e\n\u003cli\u003eBuilt in photocell with manual super saver mode for daylight harvesting - assures that lights are only on while ambient light levels require it; range can be set to 10-500 foot candles \u003c\/li\u003e\n\u003cli\u003eImpact resistant hard lens is standard and color matched to the switch\u003c\/li\u003e\n\u003cli\u003eFits standard decorator\/GFCI style wallplates (purchased separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Almond","offer_id":49086727094524,"sku":"HUBAD2001LA22-EA","price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBAD2001LA22-EA-2.jpg?v=1778563412"},{"product_id":"hubbell-ad2241gy2-gray-vacancy-sensor-switch-low-voltage-pir-us-2-circuit-24vdc","title":"Hubbell AD2241GY2 Gray Vacancy Sensor Switch Low Voltage PIR\/US 2-Circuit 24VDC","description":"Hubbell AD2241GY2 gray 2-circuit low voltage 24VDC vacancy sensor switch; requires Hubbell CU300xx series control units (purchased separately).  A vacancy switch is designed to be turned ON manually and then turns OFF automatically a preset time after motion has ceased. Vacancy switches have greater savings over occupancy sensors because lights are only turned on when the user needs them. Dual relay sensor allows control of 2 load circuits. Offers an energy savings solution for use with lighting, HVAC and to comply with Automatic Receptacle Control. The sensor operates with a control unit (purchased separately) enabling line voltage and low voltage wiring to be easily separated. This makes for an ideal cost effective solution when used in smaller spaces such as private offices, conference rooms and restrooms. Equipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor�s sensitivity and timer settings to optimize performance based on occupancy patterns. The sensor constantly learns and adjusts appropriately. Features include:\u003cul\u003e\n\u003cli\u003e24VDC low voltage sensor; requires Hubbell CU300xx series control units to operate \u003c\/li\u003e\n\u003cli\u003eSingle pole \u003c\/li\u003e\n\u003cli\u003eVacancy sensor - lights must be turned ON manually using the switch on the face and will turn OFF automatically a preset time (4-30 minutes) after motion ceases \u003c\/li\u003e\n\u003cli\u003eEquipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor's sensitivity and timer settings to optimize performance based on occupancy patterns.  \u003c\/li\u003e\n\u003cli\u003eManual or adaptive time delay - the amount of time that the switch will keep the lights on after motion is no longer detected can be set manually (4\/8\/15\/30 minutes) or automatically using the built-in Intelli-DAPT technology\u003c\/li\u003e\n\u003cli\u003eCoverage: 1,000 square feet \u003c\/li\u003e\n\u003cli\u003eSensor has no load rating; circuit load rating is determined by the control units that you are using \u003c\/li\u003e\n\u003cli\u003eDual tech sensor - combines the individual advantages of passive infrared and ultrasonic detection. Once occupancy is detected by both technologies within the space lights are turned ON, only one technology is necessary to keep the lights ON \u003c\/li\u003e\n\u003cli\u003eBuilt in photocell with manual super saver mode for daylight harvesting - assures that lights are only on while ambient light levels require it; range can be set to 10-500 foot candles \u003c\/li\u003e\n\u003cli\u003eImpact resistant hard lens is standard and color matched to the switch\u003c\/li\u003e\n\u003cli\u003eFits standard decorator\/GFCI style wallplates (purchased separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Gray","offer_id":49086727618812,"sku":"HUBAD2241GY2-EA","price":54.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBAD2241GY2-EA-G.jpg?v=1778563417"},{"product_id":"hubbell-ad2241i1-ivory-vacancy-sensor-switch-low-voltage-adaptive-pir-us-24vdc","title":"Hubbell AD2241I1 Ivory Vacancy Sensor Switch Low Voltage Adaptive PIR\/US 24VDC","description":"Hubbell AD2241I1 ivory vacancy sensor switch; requires Hubbell CU300xx series control units (purchased separately). A vacancy switch is designed to be turned ON manually and then turns OFF automatically a preset time after motion has ceased. Vacancy switches have greater savings over occupancy sensors because lights are only turned on when the user needs them. Offers an energy savings solution for use with lighting, HVAC and to comply with Automatic Receptacle Control. The sensor operates with a control unit (purchased separately) enabling line voltage and low voltage wiring to be easily separated. This makes for an ideal cost effective solution when used in smaller spaces such as private offices, conference rooms and restrooms. Equipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor�s sensitivity and timer settings to optimize performance based on occupancy patterns. The sensor constantly learns and adjusts appropriately. Features include:\u003cul\u003e\n\u003cli\u003e24VDC low voltage sensor; requires Hubbell CU300xx series control units to operate \u003c\/li\u003e\n\u003cli\u003eSingle pole \u003c\/li\u003e\n\u003cli\u003eVacancy sensor - lights must be turned ON manually using the switch on the face and will turn OFF automatically a preset time (4-30 minutes) after motion ceases \u003c\/li\u003e\n\u003cli\u003eEquipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor's sensitivity and timer settings to optimize performance based on occupancy patterns.  \u003c\/li\u003e\n\u003cli\u003eManual or adaptive time delay - the amount of time that the switch will keep the lights on after motion is no longer detected can be set manually (4\/8\/15\/30 minutes) or automatically using the built-in Intelli-DAPT technology\u003c\/li\u003e\n\u003cli\u003eCoverage: 1,000 square feet \u003c\/li\u003e\n\u003cli\u003eLoad ratings: 5A LED; 800W incandescent @ 120V; 1000W fluorescent @ 120V; 1800W fluorescent @ 277V; 1\/6 HP @ 120\/277V \u003c\/li\u003e\n\u003cli\u003eDual tech sensor - combines the individual advantages of passive infrared and ultrasonic detection. Once occupancy is detected by both technologies within the space lights are turned ON, only one technology is necessary to keep the lights ON \u003c\/li\u003e\n\u003cli\u003eBuilt in photocell with manual super saver mode for daylight harvesting - assures that lights are only on while ambient light levels require it; range can be set to 10-500 foot candles \u003c\/li\u003e\n\u003cli\u003eImpact resistant hard lens is standard and color matched to the switch\u003c\/li\u003e\n\u003cli\u003eFits standard decorator\/GFCI style wallplates (purchased separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Ivory","offer_id":49086727848188,"sku":"HUBAD2241I1-EA","price":45.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBAD2241I1-EA-G.jpg?v=1778563434"},{"product_id":"hubbell-ad2241i2-ivory-vacancy-sensor-switch-low-voltage-pir-us-2-circuit-24vdc","title":"Hubbell AD2241I2 Ivory Vacancy Sensor Switch Low Voltage PIR\/US 2-Circuit 24VDC","description":"Hubbell AD2241I2 ivory 2-circuit low voltage 24VDC vacancy sensor switch; requires Hubbell CU300xx series control units (purchased separately).  A vacancy switch is designed to be turned ON manually and then turns OFF automatically a preset time after motion has ceased. Vacancy switches have greater savings over occupancy sensors because lights are only turned on when the user needs them. Dual relay sensor allows control of 2 load circuits. Offers an energy savings solution for use with lighting, HVAC and to comply with Automatic Receptacle Control. The sensor operates with a control unit (purchased separately) enabling line voltage and low voltage wiring to be easily separated. This makes for an ideal cost effective solution when used in smaller spaces such as private offices, conference rooms and restrooms. Equipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor�s sensitivity and timer settings to optimize performance based on occupancy patterns. The sensor constantly learns and adjusts appropriately. Features include:\u003cul\u003e\n\u003cli\u003e24VDC low voltage sensor; requires Hubbell CU300xx series control units to operate \u003c\/li\u003e\n\u003cli\u003eSingle pole \u003c\/li\u003e\n\u003cli\u003eVacancy sensor - lights must be turned ON manually using the switch on the face and will turn OFF automatically a preset time (4-30 minutes) after motion ceases \u003c\/li\u003e\n\u003cli\u003eEquipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor's sensitivity and timer settings to optimize performance based on occupancy patterns.  \u003c\/li\u003e\n\u003cli\u003eManual or adaptive time delay - the amount of time that the switch will keep the lights on after motion is no longer detected can be set manually (4\/8\/15\/30 minutes) or automatically using the built-in Intelli-DAPT technology\u003c\/li\u003e\n\u003cli\u003eCoverage: 1,000 square feet \u003c\/li\u003e\n\u003cli\u003eSensor has no load rating; circuit load rating is determined by the control units that you are using \u003c\/li\u003e\n\u003cli\u003eDual tech sensor - combines the individual advantages of passive infrared and ultrasonic detection. Once occupancy is detected by both technologies within the space lights are turned ON, only one technology is necessary to keep the lights ON \u003c\/li\u003e\n\u003cli\u003eBuilt in photocell with manual super saver mode for daylight harvesting - assures that lights are only on while ambient light levels require it; range can be set to 10-500 foot candles \u003c\/li\u003e\n\u003cli\u003eImpact resistant hard lens is standard and color matched to the switch\u003c\/li\u003e\n\u003cli\u003eFits standard decorator\/GFCI style wallplates (purchased separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Ivory","offer_id":49086728339708,"sku":"HUBAD2241I2-EA","price":54.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBAD2241I2-EA-G.jpg?v=1778563440"},{"product_id":"hubbell-ad2241la2-lt-almond-vacancy-sensor-low-voltage-pir-us-2-circuit-24vdc","title":"Hubbell AD2241LA2 Lt Almond Vacancy Sensor Low Voltage PIR\/US 2-Circuit 24VDC","description":"Hubbell AD2241LA2 light almond 2-circuit low voltage 24VDC vacancy sensor switch; requires Hubbell CU300xx series control units (purchased separately).  A vacancy switch is designed to be turned ON manually and then turns OFF automatically a preset time after motion has ceased. Vacancy switches have greater savings over occupancy sensors because lights are only turned on when the user needs them. Dual relay sensor allows control of 2 load circuits. Offers an energy savings solution for use with lighting, HVAC and to comply with Automatic Receptacle Control. The sensor operates with a control unit (purchased separately) enabling line voltage and low voltage wiring to be easily separated. This makes for an ideal cost effective solution when used in smaller spaces such as private offices, conference rooms and restrooms. Equipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor�s sensitivity and timer settings to optimize performance based on occupancy patterns. The sensor constantly learns and adjusts appropriately. Features include:\u003cul\u003e\n\u003cli\u003e24VDC low voltage sensor; requires Hubbell CU300xx series control units to operate \u003c\/li\u003e\n\u003cli\u003eSingle pole \u003c\/li\u003e\n\u003cli\u003eVacancy sensor - lights must be turned ON manually using the switch on the face and will turn OFF automatically a preset time (4-30 minutes) after motion ceases \u003c\/li\u003e\n\u003cli\u003eEquipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor's sensitivity and timer settings to optimize performance based on occupancy patterns.  \u003c\/li\u003e\n\u003cli\u003eManual or adaptive time delay - the amount of time that the switch will keep the lights on after motion is no longer detected can be set manually (4\/8\/15\/30 minutes) or automatically using the built-in Intelli-DAPT technology\u003c\/li\u003e\n\u003cli\u003eSensor has no load rating; circuit load rating is determined by the control units that you are using \u003c\/li\u003e\n\u003cli\u003eDual tech sensor - combines the individual advantages of passive infrared and ultrasonic detection. Once occupancy is detected by both technologies within the space lights are turned ON, only one technology is necessary to keep the lights ON \u003c\/li\u003e\n\u003cli\u003eBuilt in photocell with manual super saver mode for daylight harvesting - assures that lights are only on while ambient light levels require it; range can be set to 10-500 foot candles \u003c\/li\u003e\n\u003cli\u003eImpact resistant hard lens is standard and color matched to the switch\u003c\/li\u003e\n\u003cli\u003eFits standard decorator\/GFCI style wallplates (purchased separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086728306940,"sku":"HUBAD2241LA2-EA","price":54.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBAD2241LA2-EA-G.jpg?v=1778563445"},{"product_id":"hubbell-ad2241la1-lt-almond-vacancy-sensor-low-voltage-adaptive-pir-us-24vdc","title":"Hubbell AD2241LA1 Lt Almond Vacancy Sensor Low Voltage Adaptive PIR\/US 24VDC","description":"Hubbell AD2241LA1 light almond vacancy sensor switch; requires Hubbell CU300xx series control units (purchased separately). A vacancy switch is designed to be turned ON manually and then turns OFF automatically a preset time after motion has ceased. Vacancy switches have greater savings over occupancy sensors because lights are only turned on when the user needs them. Offers an energy savings solution for use with lighting, HVAC and to comply with Automatic Receptacle Control. The sensor operates with a control unit (purchased separately) enabling line voltage and low voltage wiring to be easily separated. This makes for an ideal cost effective solution when used in smaller spaces such as private offices, conference rooms and restrooms. Equipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor�s sensitivity and timer settings to optimize performance based on occupancy patterns. The sensor constantly learns and adjusts appropriately. Features include:\u003cul\u003e\n\u003cli\u003e24VDC low voltage sensor; requires Hubbell CU300xx series control units to operate \u003c\/li\u003e\n\u003cli\u003eSingle pole \u003c\/li\u003e\n\u003cli\u003eVacancy sensor - lights must be turned ON manually using the switch on the face and will turn OFF automatically a preset time (4-30 minutes) after motion ceases \u003c\/li\u003e\n\u003cli\u003eEquipped with Hubbell patented self-adaptive Intelli-DAPT technology which automatically adjusts the sensor's sensitivity and timer settings to optimize performance based on occupancy patterns.  \u003c\/li\u003e\n\u003cli\u003eManual or adaptive time delay - the amount of time that the switch will keep the lights on after motion is no longer detected can be set manually (4\/8\/15\/30 minutes) or automatically using the built-in Intelli-DAPT technology\u003c\/li\u003e\n\u003cli\u003eCoverage: 1,000 square feet \u003c\/li\u003e\n\u003cli\u003eLoad ratings: 5A LED; 800W incandescent @ 120V; 1000W fluorescent @ 120V; 1800W fluorescent @ 277V; 1\/6 HP @ 120\/277V \u003c\/li\u003e\n\u003cli\u003eDual tech sensor - combines the individual advantages of passive infrared and ultrasonic detection. Once occupancy is detected by both technologies within the space lights are turned ON, only one technology is necessary to keep the lights ON \u003c\/li\u003e\n\u003cli\u003eBuilt in photocell with manual super saver mode for daylight harvesting - assures that lights are only on while ambient light levels require it; range can be set to 10-500 foot candles \u003c\/li\u003e\n\u003cli\u003eImpact resistant hard lens is standard and color matched to the switch\u003c\/li\u003e\n\u003cli\u003eFits standard decorator\/GFCI style wallplates (purchased separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086728274172,"sku":"HUBAD2241LA1-EA","price":45.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBAD2241LA1-EA-G.jpg?v=1778563439"}],"url":"https:\/\/frtelectrical.com\/collections\/occupancy-motion-sensors.oembed?page=3","provider":"Fruit Ridge Tools, LLC Electrical","version":"1.0","type":"link"}