{"title":"Hospital Grade Receptacles","description":null,"products":[{"product_id":"leviton-almond-hospital-tamper-resistant-receptacle-duplex-outlet-20a-8300-sga","title":"Leviton Almond Hospital Tamper Resistant Receptacle Duplex Outlet 20A 8300-SGA","description":"Leviton Almond Hospital Tamper Resistant Receptacle Duplex Outlet 20A 8300-SGA","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"20A \/ Almond","offer_id":49085664559356,"sku":"L8300-SGA-EA-NOBOX","price":11.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/L8300-SGA-EA-NOBOX-2.jpg?v=1778550474"},{"product_id":"leviton-orange-isolated-ground-hospital-surge-receptacle-outlet-15a-8281-igo","title":"Leviton ORANGE Isolated Ground Hospital Surge Receptacle Outlet 15A 8281-IGO","description":"Leviton 828I-IGO orange Decora hospital grade single outlet receptacle with surge suppression and audible alarm. The bright orange color is great for calling attention to this special receptacle. The single outlet design is good for locations where you want to dedicate an outlet\/circuit to a particular appliance or machine: workshops, computer rooms, offices, etc. Protects sensitive equipment from potentially damaging transient voltage spikes. Hospital Grade, NEMA 5-15R, 2-pole, 3-wire, side wired, isolated ground, rated 15A 125VAC. Each is individually packaged with instructions. Features include:\u003cul\u003e \u003cli\u003eHospital Grade - hospital grade devices are top of the line in their category, designed for high-abuse healthcare, industrial and commercial applications\u003c\/li\u003e\n\u003cli\u003eIsolated Ground - provides pure ground path for use in isolated grounding systems. Isolated ground devices have a grounding terminal that is electronically isolated from the strap to eliminate electrical interference (noise) in grounding networks that can cause problems in modern electronics \u003c\/li\u003e\n\u003cli\u003eProvides hard-wired point-of-use surge protection for electronic equipment in industrial, commercial and residential applications \u003c\/li\u003e\n\u003cli\u003e3-level surge protection for phase-to-neutral, phase-to-ground, and neutral-to-ground \u003c\/li\u003e\n\u003cli\u003eMonitor\/Indicator LED is ON continuously when protection is active and OFF when protection circuit is deactivated due to excessive transients \u003c\/li\u003e\n\u003cli\u003eAudible tone alert sounds if protection is lost \u003c\/li\u003e\n\u003cli\u003eEMI\/RFI filtering \u003c\/li\u003e\n\u003cli\u003eIncludes wallplate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"15A","offer_id":49085686448380,"sku":"L8281-IGO-EA","price":17.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/L8281-IGO-EA-2.jpg?v=1778550664"},{"product_id":"leviton-8381-i-ivory-hospital-led-surge-receptacle-outlets-w-alarm-20a-10-pack","title":"Leviton 8381-I Ivory Hospital LED Surge Receptacle Outlets w\/ Alarm 20A 10-Pack","description":"10 Leviton 8381-I ivory Decora hospital grade single outlet receptacles with surge suppression and audible alarm. The single outlet design is good for locations where you want to dedicate an outlet\/circuit to a particular appliance or machine: workshops, computer rooms, offices, etc. Protects sensitive equipment from potentially damaging transient voltage spikes. Hospital Grade, NEMA 5-20R, 2-pole, 3-wire, side wired, grounding, rated 20A 125VAC. Each is individually packaged with instructions. Features include:\u003cul\u003e \u003cli\u003eHospital Grade - hospital grade devices are top of the line in their category, designed for high-abuse healthcare, industrial and commercial applications \u003c\/li\u003e\n\u003cli\u003eProvides hard-wired point-of-use surge protection for electronic equipment in industrial, commercial and residential applications \u003c\/li\u003e\n\u003cli\u003e3-level surge protection for phase-to-neutral, phase-to-ground, and neutral-to-ground \u003c\/li\u003e\n\u003cli\u003eMonitor\/Indicator LED is ON continuously when protection is active and OFF when protection circuit is deactivated due to excessive transients \u003c\/li\u003e\n\u003cli\u003eAudible tone alert sounds if protection is lost \u003c\/li\u003e\n\u003cli\u003eEMI\/RFI filtering \u003c\/li\u003e\n\u003cli\u003eIncludes wallplate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"20A \/ Ivory","offer_id":49085704274172,"sku":"L8381-I-10PK","price":136.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/L8381-I-10PK-2.jpg?v=1778551180"},{"product_id":"leviton-n7599-hgi-ivory-hospital-grade-slim-gfci-wallplate-15a-125v-receptacle","title":"Leviton N7599-HGI Ivory Hospital Grade Slim GFCI Wallplate 15A-125V Receptacle","description":"Features include:\u003cli\u003eIvory \u003c\/li\u003e\u003cli\u003eSteel \u003c\/li\u003e\u003cli\u003e125V \u003c\/li\u003e\u003cli\u003e15A \u003c\/li\u003e\u003cli\u003eFeed-Through \u003c\/li\u003e\u003cli\u003eHospital Grade \u003c\/li\u003e\u003cli\u003eSmartLock Pro GFCI\u003c\/li\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title \/ Ivory","offer_id":49085859463420,"sku":"LN7599-HGI-EA","price":13.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/LN7599-HGI-EA-2.jpg?v=1778554162"},{"product_id":"hubbell-snap2172bka-black-snapconnect-hospital-grade-outlet-receptacle-15a","title":"Hubbell SNAP2172BKA Black SnapConnect Hospital Grade Outlet Receptacle 15A","description":"Hubbell SNAP2172BKA black duplex SnapConnect hospital grade decorator receptacle. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-15R, 2-pole, 3-wire, grounding, rated 15A 125V. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e \u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip\u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, rated at 15A 125V \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs was mentioned, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSNAP1RA: solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (assembled in USA): solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (assembled in USA): stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"15A \/ Black","offer_id":49086216798460,"sku":"HUBSNAP2172BKA-EA","price":9.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP2172BKA-L-G.jpg?v=1778557182"},{"product_id":"hubbell-snap2172a-brown-snapconnect-hospital-grade-duplex-outlet-receptacle-15a","title":"Hubbell SNAP2172A Brown SnapConnect Hospital Grade Duplex Outlet Receptacle 15A","description":"Hubbell SNAP2172A brown duplex SnapConnect hospital grade decorator receptacle. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-15R, 2-pole, 3-wire, grounding, rated 15A 125V. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e \u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip\u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, rated at 15A 125V \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs was mentioned, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSNAP1RA: solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (assembled in USA): solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (assembled in USA): stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"15A \/ Brown","offer_id":49086216634620,"sku":"HUBSNAP2172A-EA","price":11.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP2172A-L-G.jpg?v=1778557176"},{"product_id":"hubbell-snap2172bktra-black-snapconnect-hospital-grade-tr-outlet-receptacle-15a","title":"Hubbell SNAP2172BKTRA Black SnapConnect Hospital Grade TR Outlet Receptacle 15A","description":"Hubbell SNAP2172BKTRA black duplex SnapConnect hospital grade decorator tamper resistant receptacle. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-15R, 2-pole, 3-wire, grounding, rated 15A 125V. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e\n\u003cli\u003ePatented tamper resistant design eliminates plug-in difficulty. Provides protection that feels like it is not even there: tamper resistant...NOT plug resistant \u003c\/li\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip\u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, rated at 15A 125V \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs was mentioned, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSNAP1RA: solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (assembled in USA): solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (assembled in USA): stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"15A \/ Black","offer_id":49086217322748,"sku":"HUBSNAP2172BKTRA-EA","price":11.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP2172BKTRA-L-G.jpg?v=1778557203"},{"product_id":"hubbell-snap2172il-ivory-snapconnect-hospital-grade-outlet-receptacle-w-leds-15a","title":"Hubbell SNAP2172IL Ivory SnapConnect Hospital Grade Outlet Receptacle w\/LEDs 15A","description":"Hubbell SNAP2172IL ivory duplex SnapConnect hospital grade decorator receptacle with twin LED power indicators on the face. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-15R, 2-pole, 3-wire, grounding, rated 15A 125V. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e\n\u003cli\u003eTwin LED indicators on the face to provide positive indication of power state \u003c\/li\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip\u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, rated at 15A 125V \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs was mentioned, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSNAP1RA: solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (assembled in USA): solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (assembled in USA): stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"15A \/ Ivory","offer_id":49086217421052,"sku":"HUBSNAP2172IL-EA","price":13.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP2172IL-L-G.jpg?v=1778557211"},{"product_id":"hubbell-snap2172rltra-red-15a-snapconnect-hospital-tr-outlet-receptacle-w-led","title":"Hubbell SNAP2172RLTRA Red 15A SnapConnect Hospital TR Outlet Receptacle w\/LED","description":"Hubbell SNAP2172RLTRA red duplex SnapConnect hospital grade decorator tamper resistant receptacle with power indicating LED's on the face. The bright red color is great for locations where you want to call attention to this special outlet: workshops, garages, computer rooms, etc. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-15R, 2-pole, 3-wire, grounding, rated 15A 125V. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e\n\u003cli\u003eTwin LED indicators on the face to provide positive indication of power state\u003c\/li\u003e\n\u003cli\u003ePatented tamper resistant design eliminates plug-in difficulty. Provides protection that feels like it is not even there: tamper resistant...NOT plug resistant \u003c\/li\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip\u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, rated at 15A 125V \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs was mentioned, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSNAP1RA: solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (assembled in USA): solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (assembled in USA): stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"15A \/ Red","offer_id":49086217945340,"sku":"HUBSNAP2172RLTRA-EA","price":12.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP2172RLTRA-L-G.jpg?v=1778557228"},{"product_id":"hubbell-red-snapconnect-hospital-grade-receptacle-outlet-led-15a-snap8200rl","title":"Hubbell Red SnapConnect Hospital Grade Receptacle Outlet LED 15A SNAP8200RL","description":"Hubbell SNAP8200RL red SnapConnector Hospital Grade duplex receptacle with twin LED power indicators on the face.  The bright red color is great for locations where you want to call attention to this special outlet: workshops, garages, computer rooms, etc. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-15R, 2-pole, 3-wire, grounding, rated 15A 125V. Hospital grade devices are top of the line in their category, designed for high-abuse environments such as those found in healthcare facilities. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e\n\u003cli\u003eTwin LED indicators on the face to provide positive indication of power state\u003c\/li\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip \u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, NEMA 5-15R, rated 15A 125V \u003cul\u003e\n\u003cp\u003eAs was mentioned several times above, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSNAP1RA: Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (Assembled in USA): Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (Assembled in USA): Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"15A \/ Red","offer_id":49086218010876,"sku":"HUBSNAP8200RL-EA","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP8200RL-G.jpg?v=1778557248"},{"product_id":"hubbell-brown-snapconnect-hospital-grade-tr-receptacle-outlet-15a-snap8200tra","title":"Hubbell Brown SnapConnect Hospital Grade TR Receptacle Outlet 15A SNAP8200TRA","description":"Hubbell SNAP8200TRA brown SnapConnector Hospital Grade duplex tamper resistant receptacle. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-15R, 2-pole, 3-wire, grounding, rated 15A 125V. Hospital grade devices are top of the line in their category, designed for high-abuse environments such as those found in healthcare facilities. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e\n\u003cli\u003ePatented tamper resistant design eliminates plug-in difficulty. Provides protection that feels like it is not even there: tamper resistant...NOT plug resistant\u003c\/li\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications\u003c\/li\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip \u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, NEMA 5-15R, rated 15A 125V \u003cul\u003e\n\u003cp\u003eAs was mentioned several times above, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSNAP1RA: Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (Assembled in USA): Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (Assembled in USA): Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"15A \/ Brown","offer_id":49086218436860,"sku":"HUBSNAP8200TRA-EA","price":8.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP8200TRA-EA-G.jpg?v=1778557248"},{"product_id":"hubbell-snap8200lal-snapconnect-light-almond-15a-hospital-receptacle-outlet","title":"Hubbell SNAP8200LAL SnapConnect Light Almond 15A Hospital Receptacle Outlet","description":"Hubbell SNAP8200LAL almond SnapConnector Hospital Grade duplex receptacle with twin LED power indicators on the face. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-15R, 2-pole, 3-wire, grounding, rated 15A 125V. Hospital grade devices are top of the line in their category, designed for high-abuse environments such as those found in healthcare facilities. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e\n\u003cli\u003eTwin LED indicators on the face to provide positive indication of power state\u003c\/li\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip \u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, NEMA 5-15R, rated 15A 125V \u003cul\u003e\n\u003cp\u003eAs was mentioned several times above, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSNAP1RA: Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (Assembled in USA): Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (Assembled in USA): Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"15A \/ Light Almond","offer_id":49086218273020,"sku":"HUBSNAP8200LAL-EA","price":11.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP8200LAL-G.jpg?v=1778557247"},{"product_id":"hubbell-snap2172tra-brown-snapconnect-hospital-grade-tr-outlet-receptacle-15a","title":"Hubbell SNAP2172TRA Brown SnapConnect Hospital Grade TR Outlet Receptacle 15A","description":"Hubbell SNAP2172TRA brown duplex SnapConnect hospital grade decorator tamper resistant receptacle. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-15R, 2-pole, 3-wire, grounding, rated 15A 125V. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e\n\u003cli\u003ePatented tamper resistant design eliminates plug-in difficulty. Provides protection that feels like it is not even there: tamper resistant...NOT plug resistant \u003c\/li\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip\u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, rated at 15A 125V \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs was mentioned, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSNAP1RA: solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (assembled in USA): solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (assembled in USA): stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"15A \/ Brown","offer_id":49086218207484,"sku":"HUBSNAP2172TRA-EA","price":11.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP2172TRA-L-G.jpg?v=1778557263"},{"product_id":"hubbell-snap8362gys-gray-snapconnect-surge-outlet-tamper-resist-receptacle-20a","title":"Hubbell SNAP8362GYS Gray SnapConnect SURGE Outlet Tamper Resist Receptacle 20A","description":"Hubbell SNAP8362GYS gray duplex decorator SnapConnect hospital grade transient voltage surge supressor tamper resistant receptacle. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Device is equipped with an LED indicator light and an audible alarm. Extra heavy duty specification grade, NEMA 5-20R, 2-pole, 3-wire, grounding, SnapConnect wired, rated 20A 120V. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e\n\u003cli\u003ePatented tamper resistant design eliminates plug-in difficulty. Provides protection that feels like it is not even there: tamper resistant...NOT plug resistant\u003c\/li\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip \u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, rated 20A 125V \u003cul\u003e\n\u003cp\u003eAs was mentioned several times above, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSNAP1RA: solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (assembled in USA): solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (assembled in USA): stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"20A \/ Gray","offer_id":49086218240252,"sku":"HUBSNAP8362GYS-EA","price":45.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP8362GYS-L-G.jpg?v=1778557263"},{"product_id":"hubbell-snap2182igl-snapconnect-20a-isolated-ground-hospital-outlet-receptacle","title":"Hubbell SNAP2182IGL SnapConnect 20A Isolated Ground Hospital Outlet Receptacle","description":"Hubbell SNAP2182IGL orange duplex SnapConnect hospital grade decorator isolated ground receptacle with twin LED power indicators on the face. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-20R, 2-pole, 3-wire, isolated ground, rated 20A 125V. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities. Isolated ground devices have a grounding terminal that is electronically isolated from the strap to eliminate electrical interference (noise) in grounding networks that can cause problems in modern electronics. Grounding of this device requires that an isolated ground path be established from the receptacle grounding terminal to a suitable equipment grounding point \"upstream\" from the device.  Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e\n\u003cli\u003eTwin LED indicators on the face to provide positive indication of power state \u003c\/li\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip\u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, rated at 20A 125V \u003cul\u003e\n\u003cp\u003eAs was mentioned, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSNAP1RA: solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (assembled in USA): solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (assembled in USA): stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"20A","offer_id":49086218469628,"sku":"HUBSNAP2182IGL-EA","price":10.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP2182IGL-G.jpg?v=1778557269"},{"product_id":"hubbell-snap2182isc-ivory-snapconnect-hospital-grd-receptacle-split-circuit-20a","title":"Hubbell SNAP2182ISC Ivory SnapConnect Hospital Grd Receptacle Split Circuit 20A","description":"Hubbell SNAP2182ISC ivory duplex SnapConnect hospital grade decorator receptacle with split circuit configuration. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-20R, 2-pole, 3-wire, grounding, rated 20A 125V. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e \u003cli\u003ePreconfigured split circuit design \u003c\/li\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip\u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, rated at 20A 125V \u003cul\u003e\n\u003cp\u003eAs was mentioned, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSNAP1RA: solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (assembled in USA): solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (assembled in USA): stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086218961148,"sku":"HUBSNAP2182ISC-EA","price":12.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP2182ISC-L-G.jpg?v=1778557274"},{"product_id":"hubbell-snap2182wsc-white-20a-snapconnect-hospital-grd-receptacle-split-circuit","title":"Hubbell SNAP2182WSC White 20A SnapConnect Hospital Grd Receptacle Split Circuit","description":"Hubbell SNAP2182WSC white duplex SnapConnect hospital grade decorator receptacle with split circuit configuration. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-20R, 2-pole, 3-wire, grounding, rated 20A 125V. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e \u003cli\u003ePreconfigured split circuit design \u003c\/li\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip\u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, rated at 20A 125V \u003cul\u003e\n\u003cp\u003eAs was mentioned, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSNAP1RA: solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (assembled in USA): solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (assembled in USA): stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086218928380,"sku":"HUBSNAP2182WSC-EA","price":10.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP2182WSC-L-G.jpg?v=1778557274"},{"product_id":"hubbell-snap2182rigltra-red-isolated-gnd-snapconnect-hospital-tr-receptacle-20a","title":"Hubbell SNAP2182RIGLTRA Red Isolated Gnd SnapConnect Hospital TR Receptacle 20A","description":"Hubbell SNAP2182RIGLTRA red duplex SnapConnect hospital grade decorator isolated ground tamper resistant receptacle with twin LED power indicators on the face. The bright red color is great for locations where you want to call attention to this special outlet: workshops, garages, computer rooms, etc\u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-20R, 2-pole, 3-wire, isolated ground, rated 20A 125V. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities. Isolated ground devices have a grounding terminal that is electronically isolated from the strap to eliminate electrical interference (noise) in grounding networks that can cause problems in modern electronics. Grounding of this device requires that an isolated ground path be established from the receptacle grounding terminal to a suitable equipment grounding point \"upstream\" from the device.  Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e\n\u003cli\u003ePatented tamper resistant design eliminates plug-in difficulty. Provides protection that feels like it is not even there: tamper resistant...NOT plug resistant \u003c\/li\u003e\n\u003cli\u003eTwin LED indicators on the face to provide positive indication of power state \u003c\/li\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip\u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, rated at 20A 125V \u003cul\u003e\n\u003cp\u003eAs was mentioned, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSNAP1RA: solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (assembled in USA): solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (assembled in USA): stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086219124988,"sku":"HUBSNAP2182RIGLTRA-EA","price":18.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP2182RIGLTRA-G.jpg?v=1778557286"},{"product_id":"hubbell-snap2182sc-brown-20a-snapconnect-hospital-grade-receptacle-split-circuit","title":"Hubbell SNAP2182SC Brown 20A SnapConnect Hospital Grade Receptacle Split Circuit","description":"Hubbell SNAP2182SC brown duplex SnapConnect hospital grade decorator receptacle with split circuit configuration. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-20R, 2-pole, 3-wire, grounding, rated 20A 125V. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e \u003cli\u003ePreconfigured split circuit design \u003c\/li\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip\u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, rated at 20A 125V \u003cul\u003e\n\u003cp\u003eAs was mentioned, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSNAP1RA: solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (assembled in USA): solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (assembled in USA): stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086219387132,"sku":"HUBSNAP2182SC-EA","price":10.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP2182SC-L-G.jpg?v=1778557295"},{"product_id":"hubbell-snap2182rigtra-red-isolated-gnd-snapconnect-hospital-tr-receptacle-20a","title":"Hubbell SNAP2182RIGTRA Red Isolated Gnd SnapConnect Hospital TR Receptacle 20A","description":"Hubbell SNAP2182RIGTRA red duplex SnapConnect hospital grade decorator isolated ground tamper resistant receptacle. The bright red color is great for locations where you want to call attention to this special outlet: workshops, garages, computer rooms, etc\u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-20R, 2-pole, 3-wire, isolated ground, rated 20A 125V. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities. Isolated ground devices have a grounding terminal that is electronically isolated from the strap to eliminate electrical interference (noise) in grounding networks that can cause problems in modern electronics. Grounding of this device requires that an isolated ground path be established from the receptacle grounding terminal to a suitable equipment grounding point \"upstream\" from the device.  Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e\n\u003cli\u003ePatented tamper resistant design eliminates plug-in difficulty. Provides protection that feels like it is not even there: tamper resistant...NOT plug resistant \u003c\/li\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip\u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, rated at 20A 125V \u003cul\u003e\n\u003cp\u003eAs was mentioned, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSNAP1RA: solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (assembled in USA): solid wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (assembled in USA): stranded wire; clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086219419900,"sku":"HUBSNAP2182RIGTRA-EA","price":16.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP2182RIGTRA-G.jpg?v=1778557295"},{"product_id":"10-hubbell-almond-snapconnect-hospital-grade-receptacles-outlet-20a-snap8300ala","title":"10 Hubbell Almond SnapConnect Hospital Grade Receptacles Outlet 20A SNAP8300ALA","description":"10 Hubbell SNAP8300ALA almond SnapConnector Hospital Grade duplex receptacles. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-20R, 2-pole, 3-wire, grounding, rated 20A 125V. Hospital grade devices are top of the line in their category, designed for high-abuse environments such as those found in healthcare facilities. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip \u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, NEMA 5-20R, rated 20A 125V \u003cul\u003e\n\u003cp\u003eAs was mentioned several times above, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSNAP1RA: Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (Assembled in USA): Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (Assembled in USA): Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"20A \/ Almond","offer_id":49086224924924,"sku":"HUBSNAP8300ALA-10PK","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP8300ALA-10PK-L-G.jpg?v=1780285743"},{"product_id":"hubbell-almond-snapconnect-hospital-grade-receptacle-outlet-15a-snap8200ala","title":"Hubbell Almond SnapConnect Hospital Grade Receptacle Outlet 15A SNAP8200ALA","description":"Hubbell SNAP8200ALA almond SnapConnector Hospital Grade duplex receptacle. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-15R, 2-pole, 3-wire, grounding, rated 15A 125V. Hospital grade devices are top of the line in their category, designed for high-abuse environments such as those found in healthcare facilities. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip \u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, NEMA 5-15R, rated 15A 125V \u003cul\u003e\n\u003cp\u003eAs was mentioned several times above, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSNAP1RA: Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (Assembled in USA): Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (Assembled in USA): Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"15A \/ Almond","offer_id":49086225187068,"sku":"HUBSNAP8200ALA-EA","price":8.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP8200ALA-L-G.jpg?v=1778557493"},{"product_id":"10-hubbell-almond-snapconnect-hospital-grade-receptacles-outlet-15a-snap8200ala","title":"10 Hubbell Almond SnapConnect Hospital Grade Receptacles Outlet 15A SNAP8200ALA","description":"10 Hubbell SNAP8200ALA almond SnapConnector Hospital Grade duplex receptacles. \u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e Hospital grade, SnapConnect wired, NEMA 5-15R, 2-pole, 3-wire, grounding, rated 15A 125V. Hospital grade devices are top of the line in their category, designed for high-abuse environments such as those found in healthcare facilities. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e\n\u003cli\u003eAbuse resistant nylon for extra heavy use applications \u003c\/li\u003e\n\u003cli\u003eSNAPConnect eliminates exposed live parts \u003c\/li\u003e\n\u003cli\u003eStainless steel autoground clip \u003c\/li\u003e\n\u003cli\u003e2-pole, 3-wire, NEMA 5-15R, rated 15A 125V \u003cul\u003e\n\u003cp\u003eAs was mentioned several times above, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSNAP1RA: Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (Assembled in USA): Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (Assembled in USA): Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"15A \/ Almond","offer_id":49086225350908,"sku":"HUBSNAP8200ALA-10PK","price":36.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP8200ALA-10PK-L-G.jpg?v=1778557498"},{"product_id":"10-hubbell-ivory-hospital-grade-snapconnect-15a-tr-receptacles-usb-snap8200usbi","title":"10 Hubbell Ivory Hospital Grade SnapConnect 15A TR Receptacles USB SNAP8200USBI","description":"10 Hubbell SNAPConnect SNAP8200USBI ivory tamper resistant decorator duplex hospital grade outlets with 2 USB charger ports.\u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e  Charge your USB powered electronics without giving up an outlet - Compatible with USB 1.1\/2.0\/3.0 devices. Hospital Grade, NEMA 5-15R, 2-pole, 3-wire, grounding, SNAPConnect wired, rated 15A 125V,  two USB type 2.0 ports 3 Amp, 5 Volt DC .  Features include:\u003cul\u003e \u003cli\u003eTwo USB ports 3 Amp, 5V DC, type A, class 2.0 \u003c\/li\u003e\n\u003cli\u003eCharges two devices simultaneously \u003c\/li\u003e\n\u003cli\u003eTamper-Resistant decorator duplex receptacle \u003c\/li\u003e\n\u003cli\u003eGreen LED indicator to show USB power available \u003c\/li\u003e\n\u003cli\u003eCompatible with USB 1.1\/2.0\/3.0 devices \u003c\/li\u003e\n\u003cli\u003ePatented tamper resistant shutter design provides tamper resistance, not plug resistance \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs was mentioned several times above, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSNAP1RA: Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (Assembled in USA): Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (Assembled in USA): Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086226858236,"sku":"HUBSNAP8200USBI-10PK","price":209.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP8200USBI-10PK-L-G.jpg?v=1778557532"},{"product_id":"hubbell-ivory-hospital-grade-snapconnect-15a-tr-receptacle-2-0-usb-snap8200usbi","title":"Hubbell Ivory Hospital Grade SnapConnect 15A TR Receptacle 2.0 USB SNAP8200USBI","description":"Hubbell SNAPConnect SNAP8200USBI ivory tamper resistant decorator duplex hospital grade outlet with 2 USB charger ports.\u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e  Charge your USB powered electronics without giving up an outlet - Compatible with USB 1.1\/2.0\/3.0 devices. Hospital Grade, NEMA 5-15R, 2-pole, 3-wire, grounding, SNAPConnect wired, rated 15A 125V,  two USB type 2.0 ports 3 Amp, 5 Volt DC .  Features include:\u003cul\u003e \u003cli\u003eTwo USB ports 3 Amp, 5V DC, type A, class 2.0 \u003c\/li\u003e\n\u003cli\u003eCharges two devices simultaneously \u003c\/li\u003e\n\u003cli\u003eTamper-Resistant decorator duplex receptacle \u003c\/li\u003e\n\u003cli\u003eGreen LED indicator to show USB power available \u003c\/li\u003e\n\u003cli\u003eCompatible with USB 1.1\/2.0\/3.0 devices \u003c\/li\u003e\n\u003cli\u003ePatented tamper resistant shutter design provides tamper resistance, not plug resistance \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs was mentioned several times above, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSNAP1RA: Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (Assembled in USA): Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (Assembled in USA): Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086226956540,"sku":"HUBSNAP8200USBI-EA","price":22.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP8200USBI-L-G.jpg?v=1778557543"},{"product_id":"10-hubbell-black-hospital-grade-snapconnect-20a-tr-receptacles-usb-snap8300usbbk","title":"10 Hubbell Black Hospital Grade SnapConnect 20A TR Receptacles USB SNAP8300USBBK","description":"10 Hubbell SNAPConnect SNAP8300USBBK black tamper resistant decorator duplex hospital grade outlets with 2 USB charger ports.\u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e  Charge your USB powered electronics without giving up an outlet - Compatible with USB 1.1\/2.0\/3.0 devices. Hospital Grade, NEMA 5-20R, 2-pole, 3-wire, grounding, SNAPConnect wired, rated 20A 125V,  two USB type 2.0 ports 3 Amp, 5 Volt DC .  Features include:\u003cul\u003e \u003cli\u003eTwo USB ports 3 Amp, 5V DC, type A, class 2.0 \u003c\/li\u003e\n\u003cli\u003eCharges two devices simultaneously \u003c\/li\u003e\n\u003cli\u003eTamper-Resistant decorator duplex receptacle \u003c\/li\u003e\n\u003cli\u003eGreen LED indicator to show USB power available \u003c\/li\u003e\n\u003cli\u003eCompatible with USB 1.1\/2.0\/3.0 devices \u003c\/li\u003e\n\u003cli\u003ePatented tamper resistant shutter design provides tamper resistance, not plug resistance \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs was mentioned several times above, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSNAP1RA: Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (Assembled in USA): Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (Assembled in USA): Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086226891004,"sku":"HUBSNAP8300USBBK-10PK","price":228.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP8300USBBK-10PK-L-G.jpg?v=1778557532"},{"product_id":"hubbell-black-hospital-grade-snapconnect-20a-tr-receptacle-2-0-usb-snap8300usbbk","title":"Hubbell Black Hospital Grade SnapConnect 20A TR Receptacle 2.0 USB SNAP8300USBBK","description":"Hubbell SNAPConnect SNAP8300USBBK black tamper resistant decorator duplex hospital grade outlet with 2 USB charger ports.\u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e  Charge your USB powered electronics without giving up an outlet - Compatible with USB 1.1\/2.0\/3.0 devices. Hospital Grade, NEMA 5-20R, 2-pole, 3-wire, grounding, SNAPConnect wired, rated 20A 125V,  two USB type 2.0 ports 3 Amp, 5 Volt DC .  Features include:\u003cul\u003e \u003cli\u003eTwo USB ports 3 Amp, 5V DC, type A, class 2.0 \u003c\/li\u003e\n\u003cli\u003eCharges two devices simultaneously \u003c\/li\u003e\n\u003cli\u003eTamper-Resistant decorator duplex receptacle \u003c\/li\u003e\n\u003cli\u003eGreen LED indicator to show USB power available \u003c\/li\u003e\n\u003cli\u003eCompatible with USB 1.1\/2.0\/3.0 devices \u003c\/li\u003e\n\u003cli\u003ePatented tamper resistant shutter design provides tamper resistance, not plug resistance \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs was mentioned several times above, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSNAP1RA: Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (Assembled in USA): Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (Assembled in USA): Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086227153148,"sku":"HUBSNAP8300USBBK-EA","price":27.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP8300USBBK-L-G.jpg?v=1778557552"},{"product_id":"hubbell-snap8300usb-brown-hospital-snapconnect-20a-tr-receptacles-usb-10-pack","title":"Hubbell SNAP8300USB Brown Hospital SnapConnect 20A TR Receptacles USB 10-Pack","description":"10 Hubbell SNAPConnect SNAP8300USB brown tamper resistant decorator duplex hospital grade outlets with 2 USB charger ports.\u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e  Charge your USB powered electronics without giving up an outlet - Compatible with USB 1.1\/2.0\/3.0 devices. Hospital Grade, NEMA 5-20R, 2-pole, 3-wire, grounding, SNAPConnect wired, rated 20A 125V,  two USB type 2.0 ports 3 Amp, 5 Volt DC .  Features include:\u003cul\u003e \u003cli\u003eTwo USB ports 3 Amp, 5V DC, type A, class 2.0 \u003c\/li\u003e\n\u003cli\u003eCharges two devices simultaneously \u003c\/li\u003e\n\u003cli\u003eTamper-Resistant decorator duplex receptacle \u003c\/li\u003e\n\u003cli\u003eGreen LED indicator to show USB power available \u003c\/li\u003e\n\u003cli\u003eCompatible with USB 1.1\/2.0\/3.0 devices \u003c\/li\u003e\n\u003cli\u003ePatented tamper resistant shutter design provides tamper resistance, not plug resistance \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs was mentioned several times above, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSNAP1RA: Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (Assembled in USA): Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (Assembled in USA): Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086227382524,"sku":"HUBSNAP8300USB-10PK","price":228.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP8300USB-10PK-L-G.jpg?v=1778557552"},{"product_id":"hubbell-brown-hospital-grade-snapconnect-20a-tr-receptacle-2-0-usb-snap8300usb","title":"Hubbell Brown Hospital Grade SnapConnect 20A TR Receptacle 2.0 USB SNAP8300USB","description":"Hubbell SNAPConnect SNAP8300USB brown tamper resistant decorator duplex hospital grade outlet with 2 USB charger ports.\u003cb\u003ePlease note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below)\u003c\/b\u003e. SNAPConnect�s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. \u003cb\u003eWe do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some.\u003c\/b\u003e  Charge your USB powered electronics without giving up an outlet - Compatible with USB 1.1\/2.0\/3.0 devices. Hospital Grade, NEMA 5-20R, 2-pole, 3-wire, grounding, SNAPConnect wired, rated 20A 125V,  two USB type 2.0 ports 3 Amp, 5 Volt DC .  Features include:\u003cul\u003e \u003cli\u003eTwo USB ports 3 Amp, 5V DC, type A, class 2.0 \u003c\/li\u003e\n\u003cli\u003eCharges two devices simultaneously \u003c\/li\u003e\n\u003cli\u003eTamper-Resistant decorator duplex receptacle \u003c\/li\u003e\n\u003cli\u003eGreen LED indicator to show USB power available \u003c\/li\u003e\n\u003cli\u003eCompatible with USB 1.1\/2.0\/3.0 devices \u003c\/li\u003e\n\u003cli\u003ePatented tamper resistant shutter design provides tamper resistance, not plug resistance \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs was mentioned several times above, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSNAP1RA: Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RA: Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP1RNA (Assembled in USA): Solid Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003cli\u003eSNAP2RNA (Assembled in USA): Stranded Wire; Clear right angle terminal with 6\" leads, 600V, #12 AWG THHN\/THWN-2, Polycarbonate housing material \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086227546364,"sku":"HUBSNAP8300USB-EA","price":27.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP8300USB-L-G.jpg?v=1778557559"},{"product_id":"hubbell-snapconnect-duplex-receptacle-almond-20a-125v-specification-grade","title":"Hubbell SnapConnect Duplex Receptacle Almond 20A 125V Specification Grade","description":"Hubbell Snap Connect Duplex Receptacle Almond 20A 125V Specification Grade","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086227775740,"sku":"HUBSNAP5326ALA-EA","price":4.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBSNAP5326ALA-L-G.jpg?v=1778557565"},{"product_id":"leviton-slim-tamper-resistant-light-almond-duplex-outlet-5-20r-20a-bulk-5362-sgt","title":"Leviton Slim Tamper Resistant Light Almond Duplex Outlet 5-20R 20A Bulk 5362-SGT","description":"Leviton 5362-SGT light almond slim body duplex receptacle. Industrial Grade, 2-pole, 3-wire, self-grounding, tamper-resistant, rated 20A 125V. Tamper-resistant receptacles have shutters inside the slots that will only open if there is pressure on both of the openings at the same time - preventing the insertion of most foreign objects. Bulk packed loose with no individual packaging; as a result some may have minor dings. Features include:\u003cul\u003e\n\u003cli\u003eLarge, triple-wipe, brass \"T\" contacts for superior contact and conductivity \u003c\/li\u003e\n\u003cli\u003eBack and side wired \u003c\/li\u003e\n\u003cli\u003eBrass terminal screws to reduce conductor oxidation \u003c\/li\u003e\n\u003cli\u003eBreak-off tabs for easy two-circuit conversion \u003c\/li\u003e\n\u003cli\u003eApron barrier to prevent accidental contact between terminal screw heads and metal box \u003c\/li\u003e\n\u003cli\u003eExclusive V-shaped, serrated back-wiring clamps for superior contact and conductivity \u003c\/li\u003e\n\u003cli\u003eImpact-resistant thermoplastic nylon cover and body \u003c\/li\u003e\n\u003cli\u003eSmooth face does not collect dirt \u003c\/li\u003e\n\u003cli\u003eFour corner latches securely fasten face \u003c\/li\u003e\n\u003cli\u003eLocked-in mounting strap\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"20A \/ Light Almond","offer_id":49086252810492,"sku":"L5362-SGT-EA-NOBOX","price":8.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/L5362-SGT-EA-NOBOX-1.jpg?v=1778557881"},{"product_id":"hubbell-hbl8315c-20a-5-20p-hospital-connector-plug-straight-blade-black-white","title":"Hubbell HBL8315C 20A 5-20P Hospital Connector Plug Straight Blade Black White","description":"The Hubbell HBL8315C is a hospital grade straight-blade plug used on portable medical and commercial equipment. Rated 20A at 125V with a NEMA 5-20P configuration, it features a tough nylon housing and robust cord grip to provide secure, long-lasting connections. Each is individually packaged; packaging may differ from photo. Features include: \u003cul\u003e\n\u003cli\u003eHospital grade 20A, 125V, 2-pole, 3-wire grounding plug (NEMA 5-20P) \u003c\/li\u003e\n\u003cli\u003eHigh-visibility housing for quick identification on equipment cords \u003c\/li\u003e\n\u003cli\u003eRugged nylon body resists impact and common cleaning chemicals \u003c\/li\u003e\n\u003cli\u003ePowerful cord clamp protects terminals from strain \u003c\/li\u003e\n\u003cli\u003eDesigned for use in healthcare and demanding commercial environments \u003c\/li\u003e\n\u003cli\u003eMeets UL and CSA requirements for hospital grade attachments \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"Default Title","offer_id":49086726078716,"sku":"HUBHBL8315C-EA","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBHBL8315C-EA-3.jpg?v=1778563390"},{"product_id":"hubbell-white-hospital-gr-tr-1-2-controlled-switched-receptacle-15a-hbl2172lc1w","title":"Hubbell White Hospital GR TR 1\/2 Controlled Switched Receptacle 15A HBL2172LC1W","description":"Hubbell HBL2172LC1W white tamper resistant split circuit CONTROLLED hospital grade switched receptacle. Switched controlled outlet for use in Hubbell LoadLogic plug control system; typically found in commercial, retail, school, and hotel applications. Designed to be automatically controlled by a 24V low voltage signal from either occupancy sensors, or any other type of control device capable of performing this task, such as a time-of-day control device. Hospital Grade, grounding, back wired, 2-pole, 3-wire, NEMA 5-15R. Rated: Uncontrolled (always hot) - 15A 125VAC; Controlled (switched) - tungsten 8.3A, CFL \u0026amp; LED 3.75A, motor load 1\/2 HP. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities. Features include:\u003cul\u003e\n\u003cli\u003eSwitched controlled outlet for use in Hubbell LoadLogic plug control system; typically found in commercial, retail, school, and hotel applications \u003c\/li\u003e\n\u003cli\u003eAuto ON\/Auto OFF control. Capable of controlling additional receptacles downstream \u003c\/li\u003e\n\u003cli\u003e1 of the 2 outlets are controlled; split circuit - 1\/2 controlled face and downstream control \u003c\/li\u003e\n\u003cli\u003eRated: Uncontrolled (always hot) - 15A 125VAC; Controlled (switched) - tungsten 8.3A, CFL \u0026amp; LED 3.75A, motor load 1\/2 HP \u003c\/li\u003e\n\u003cli\u003ePermanently marked with universal power symbol and the word \"CONTROLLED\" to visually identify receptacles used in automatic energy management systems \u003c\/li\u003e\n\u003cli\u003eControls one outlet per device for 50% controlled applications \u003c\/li\u003e\n\u003cli\u003ePatented tamper-resistant design eliminates plug-in difficulty and TR complaints: tamper resistant, NOT plug resistant \u003c\/li\u003e\n\u003cli\u003eMarkings can be read regardless of mounting orientation \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"15A \/ White","offer_id":49086882447612,"sku":"HUBHBL2172LC1W-EA","price":50.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBHBL2172LC1W-EA-2.jpg?v=1778563977"},{"product_id":"hubbell-white-hospital-gr-tr-1-2-controlled-switched-receptacle-20a-hbl2182lc1w","title":"Hubbell White Hospital GR TR 1\/2 Controlled Switched Receptacle 20A HBL2182LC1W","description":"Hubbell HBL2182LC1W white tamper resistant split circuit CONTROLLED hospital grade switched receptacle. Switched controlled outlet for use in Hubbell LoadLogic plug control system; typically found in commercial, retail, school, and hotel applications. Designed to be automatically controlled by a 24V low voltage signal from either occupancy sensors, or any other type of control device capable of performing this task, such as a time-of-day control device. Hospital Grade, grounding, back wired, 2-pole, 3-wire, NEMA 5-20R.Rated: Uncontrolled (always hot) - 20A 125VAC; Controlled (switched) - tungsten 12.5A, CFL \u0026amp; LED 5A, motor load 1 HP. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities. Features include:\u003cul\u003e\n\u003cli\u003eSwitched controlled outlet for use in Hubbell LoadLogic plug control system; typically found in commercial, retail, school, and hotel applications \u003c\/li\u003e\n\u003cli\u003eAuto ON\/Auto OFF control. Capable of controlling additional receptacles downstream \u003c\/li\u003e\n\u003cli\u003e1 of the 2 outlets are controlled; split circuit - 1\/2 controlled face and downstream control \u003c\/li\u003e\n\u003cli\u003eRated: Uncontrolled (always hot) - 20A 125VAC; Controlled (switched) - tungsten 12.5A, CFL \u0026amp; LED 5A, motor load 1 HP \u003c\/li\u003e\n\u003cli\u003ePermanently marked with universal power symbol and the word \"CONTROLLED\" to visually identify receptacles used in automatic energy management systems \u003c\/li\u003e\n\u003cli\u003eControls one outlet per device for 50% controlled applications \u003c\/li\u003e\n\u003cli\u003ePatented tamper-resistant design eliminates plug-in difficulty and TR complaints: tamper resistant, NOT plug resistant \u003c\/li\u003e\n\u003cli\u003eMarkings can be read regardless of mounting orientation \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"20A \/ White","offer_id":49086882578684,"sku":"HUBHBL2182LC1W-EA","price":59.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBHBL2182LC1W-EA-2.jpg?v=1778563976"},{"product_id":"hubbell-white-hospital-gr-tr-2-2-controlled-switched-receptacle-15a-hbl2172lc2w","title":"Hubbell White Hospital GR TR 2\/2 Controlled Switched Receptacle 15A HBL2172LC2W","description":"Hubbell HBL2172LC2W white tamper resistant fully CONTROLLED hospital grade switched receptacle. Switched controlled outlet for use in Hubbell LoadLogic plug control system; typically found in commercial, retail, school, and hotel applications. Designed to be automatically controlled by a 24V low voltage signal from either occupancy sensors, or any other type of control device capable of performing this task, such as a time-of-day control device. Hospital Grade, grounding, back wired, 2-pole, 3-wire, NEMA 5-15R. Rated: Uncontrolled (always hot) - 15A 125VAC; Controlled (switched) - tungsten 8.3A, CFL \u0026amp; LED 3.75A, motor load 1\/2 HP. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities.Features include:\u003cul\u003e\n\u003cli\u003eSwitched controlled outlet for use in Hubbell LoadLogic plug control system; typically found in commercial, retail, school, and hotel applications \u003c\/li\u003e\n\u003cli\u003eAuto ON\/Auto OFF control. Capable of controlling additional receptacles downstream \u003c\/li\u003e\n\u003cli\u003e2 of the 2 outlets are controlled; fully controlled face and downstream control \u003c\/li\u003e\n\u003cli\u003eRated: Uncontrolled (always hot) - 15A 125VAC; Controlled (switched) - tungsten 8.3A, CFL \u0026amp; LED 3.75A, motor load 1\/2 HP \u003c\/li\u003e\n\u003cli\u003ePermanently marked with universal power symbol and the word \"CONTROLLED\" to visually identify receptacles used in automatic energy management systems \u003c\/li\u003e\n\u003cli\u003eControl both outlets per device for 100% controlled applications \u003c\/li\u003e\n\u003cli\u003ePatented tamper-resistant design eliminates plug-in difficulty and TR complaints: tamper resistant, NOT plug resistant \u003c\/li\u003e\n\u003cli\u003eMarkings can be read regardless of mounting orientation  \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"15A \/ White","offer_id":49086882513148,"sku":"HUBHBL2172LC2W-EA","price":50.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBHBL2172LC2W-EA-2.jpg?v=1778563977"},{"product_id":"hubbell-white-hospital-gr-tr-2-2-controlled-switched-receptacle-20a-hbl2182lc2w","title":"Hubbell White Hospital GR TR 2\/2 Controlled Switched Receptacle 20A HBL2182LC2W","description":"Hubbell HBL2182LC2W white tamper resistant fully CONTROLLED hospital grade switched receptacle. Switched controlled outlet for use in Hubbell LoadLogic plug control system; typically found in commercial, retail, school, and hotel applications. Designed to be automatically controlled by a 24V low voltage signal from either occupancy sensors, or any other type of control device capable of performing this task, such as a time-of-day control device. Hospital Grade, grounding, back wired, 2-pole, 3-wire, NEMA 5-20R. Rated: Uncontrolled (always hot) - 20A 125VAC; Controlled (switched) - tungsten 12.5A, CFL \u0026amp; LED 5A, motor load 1 HP. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities.Features include:\u003cul\u003e\n\u003cli\u003eSwitched controlled outlet for use in Hubbell LoadLogic plug control system; typically found in commercial, retail, school, and hotel applications \u003c\/li\u003e\n\u003cli\u003eAuto ON\/Auto OFF control. Capable of controlling additional receptacles downstream \u003c\/li\u003e\n\u003cli\u003e2 of the 2 outlets are controlled; fully controlled face and downstream control \u003c\/li\u003e\n\u003cli\u003eRated: Uncontrolled (always hot) - 20A 125VAC; Controlled (switched) - tungsten 12.5A, CFL \u0026amp; LED 5A, motor load 1 HP \u003c\/li\u003e\n\u003cli\u003ePermanently marked with universal power symbol and the word \"CONTROLLED\" to visually identify receptacles used in automatic energy management systems \u003c\/li\u003e\n\u003cli\u003eControl both outlets per device for 100% controlled applications \u003c\/li\u003e\n\u003cli\u003ePatented tamper-resistant design eliminates plug-in difficulty and TR complaints: tamper resistant, NOT plug resistant \u003c\/li\u003e\n\u003cli\u003eMarkings can be read regardless of mounting orientation  \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"20A \/ White","offer_id":49086882545916,"sku":"HUBHBL2182LC2W-EA","price":59.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBHBL2182LC2W-EA-2.jpg?v=1778563976"},{"product_id":"hubbell-brown-decorator-receptacle-hospital-grade-outlet-led-ind-20a-2182ltra","title":"Hubbell Brown Decorator Receptacle Hospital Grade Outlet LED Ind. 20A 2182LTRA","description":"Hubbell 2182LTRA brown decorator tamper resistant duplex receptacle with power indicating LED. Hospital Grade, 2-pole, 3-wire, NEMA 5-20R, back and side wired, rated 20A 125V. Features include: \u003cul\u003e\n\u003cli\u003ePower indicating LED to show power status \u003c\/li\u003e\n\u003cli\u003eTamper resistant, NOT plug resistant. The Hubbell Tamper-Resistant Mechanism eliminates the frustration and difficulty experienced using TR receptacles with plugs that have sharp, or bent blades. Hubbell TR receptacles work so well there is virtually no perceptible difference in the feel between the TR receptacles and their conventional non-TR receptacles. Trust Hubbell to deliver Tamper-Resistant protection that feels like it�s not even there.\u003c\/li\u003e\n\u003cli\u003eExclusive bypass contact design increases contact pressure, lowering the operating temperature \u003c\/li\u003e\n\u003cli\u003eFour point grounding system provides redundant grounding for low resistance ground continuity in high abuse areas \u003c\/li\u003e\n\u003cli\u003eHigh tech reinforced thermoplastic polyester (RTP) back is tough and heat resistant \u003c\/li\u003e\n\u003cli\u003eExternal wiring clamps allow for visual inspection of the terminals\u003c\/li\u003e\n\u003cli\u003eUnique strand containment feature on the terminal �bundles� the wire, ensuring 100% clamping of wire strands and reducing heat from the termination \u003c\/li\u003e\n\u003cli\u003eExclusive bypass contacts are made of brass alloy, increasing blade retention, insuring reliable uninterrupted flow of power \u003c\/li\u003e\n\u003cli\u003eBarbed contact assembly arms reduce possibility of face\/base separation \u003c\/li\u003e\n\u003cli\u003eBack wired ground terminal allows faster, easier installation  \u003c\/li\u003e\n\u003cli\u003ePatented ground contact provides redundant grounding \u003c\/li\u003e\n\u003cli\u003eReinforced thermoplastic base provides superior thermal, electrical and mechanical properties \u003c\/li\u003e\n\u003cli\u003eProviding contact stability, high performance housing material will reduce heat buildup giving you long lasting performance \u003c\/li\u003e\n\u003cli\u003eDeep body design increases impact and chemical resistance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"20A \/ Brown","offer_id":49086885200124,"sku":"HUB2182LTRA-EA","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUB2182LTRA-EA-2.jpg?v=1778564052"},{"product_id":"hubbell-brown-duplex-decorator-receptacle-hospital-grade-outlet-15a-125v-2172","title":"Hubbell Brown Duplex Decorator Receptacle Hospital Grade Outlet 15A 125V 2172","description":"Hubbell 2172 brown decorator duplex receptacle. Hospital Grade, 2-pole, 3-wire, NEMA 5-15R, back and side wired, rated 15A 125V. Features include: \u003cul\u003e\n\u003cli\u003eExclusive bypass contact design increases contact pressure, lowering the operating temperature \u003c\/li\u003e\n\u003cli\u003eFour point grounding system provides redundant grounding for low resistance ground continuity in high abuse areas \u003c\/li\u003e\n\u003cli\u003eHigh tech reinforced thermoplastic polyester (RTP) back is tough and heat resistant \u003c\/li\u003e\n\u003cli\u003eExternal wiring clamps allow for visual inspection of the terminals\u003c\/li\u003e\n\u003cli\u003eUnique strand containment feature on the terminal ?bundles? the wire, ensuring 100% clamping of wire strands and reducing heat from the termination \u003c\/li\u003e\n\u003cli\u003eExclusive bypass contacts are made of brass alloy, increasing blade retention, insuring reliable uninterrupted flow of power \u003c\/li\u003e\n\u003cli\u003eBarbed contact assembly arms reduce possibility of face\/base separation \u003c\/li\u003e\n\u003cli\u003eBack wired ground terminal allows faster, easier installation  \u003c\/li\u003e\n\u003cli\u003ePatented ground contact provides redundant grounding \u003c\/li\u003e\n\u003cli\u003eReinforced thermoplastic base provides superior thermal, electrical and mechanical properties \u003c\/li\u003e\n\u003cli\u003eProviding contact stability, high performance housing material will reduce heat buildup giving you long lasting performance \u003c\/li\u003e\n\u003cli\u003eDeep body design increases impact and chemical resistance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"15A \/ Brown","offer_id":49086906630396,"sku":"HUB2172-EA","price":9.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUB2172-EA-G.jpg?v=1778564835"},{"product_id":"hubbell-5-15r-15a-self-test-hospital-gfci-gfi-receptacle-outlet-almond-gfrst82al","title":"Hubbell 5-15R 15A Self-Test Hospital Gfci Gfi Receptacle Outlet Almond GFRST82AL","description":"Hubbell GFRST82AL almond Autoguard Self-Test GFCI receptacle. Hospital Grade, NEMA 5-15R, 2-Pole, 3-Wire Grounding, back and side wired, rated 15A-125V at receptacle and 20A-125V feed-through. Hubbell AUTOGUARD GFCI receptacles continually test and monitor for \"people protection capability\" automatically. This patented safety feature includes disconnecting power to the receptacle if critical components are damaged and GFCI protection is lost. GFCI auto-monitoring is conducted continuously within every 30 seconds. Hospital grade devices are top of the line in their category, designed for high-abuse environments such as those found in healthcare facilities. Each is individually packaged; packaging may differ from photo. Features include:\u003cul\u003e\n\u003cli\u003eHubbell AUTOGUARD GFCI receptacles continually test and monitor for \"people protection capability\" automatically \u003c\/li\u003e\n\u003cli\u003eClear visual indicators are provided on the device face representing power status, trip condition, ground fault condition and end of life status \u003c\/li\u003e\n\u003cli\u003eFor added safety, power will be denied to the receptacle face if reverse wiring of line and load was to occur \u003c\/li\u003e\n\u003cli\u003eTEST and RESET functions work together so that a tripped GFCI cannot be reset if GFCI circuit no longer provides ground fault protection \u003c\/li\u003e\n\u003cli\u003eRESET button is blocked if GFCI protection has been compromised, eliminating the possibility of end-users incorrectly assuming that a reset GFCI is providing ground fault protection when it actually is not \u003c\/li\u003e\n\u003cli\u003eProtection against line and load reversal - no power to the face or downstream receptacles if device is miswired \u003c\/li\u003e\n\u003cli\u003eWith auto-grounding clip, captive mounting screws and single tab \"breakoff\" ears and full \"breakoff\" for OEM raised covers \u003c\/li\u003e\n\u003cli\u003eThermoplastic nylon housing - this high impact and ultraviolet resistant construction provides resilience in harsh environments \u003c\/li\u003e\n\u003cli\u003eClear visual indication of GFR status - LED indicating lights: green LED (power to the device); red LED (trip condition\/ground fault condition); flashing red LED (end of life) \u003c\/li\u003e\n\u003cli\u003eInternal back wiring clamp and guide pocket provide quick and dependable termination \u003c\/li\u003e\n\u003cli\u003eMatching standard size thermoplastic wallplate included \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"15A \/ Almond","offer_id":49086910464252,"sku":"HUBGFRST82AL-EA","price":15.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/HUBGFRST82AL-EA-2.jpg?v=1778564923"},{"product_id":"eaton-white-hospital-grade-duplex-receptacle-outlet-nema-5-20r-20a-125v-ah8300w","title":"Eaton White Hospital Grade Duplex Receptacle Outlet Nema 5-20R 20A 125V AH8300W","description":"Eaton AH8300W white duplex receptacle. Hospital Grade, NEMA 5-20R, 2-pole, 3-wire, grounding, back and side wired, rated 20A 125V. Hospital grade devices are top of the line in their category, designed for high-abuse environments such as those found in healthcare facilities. Features include:\u003cul\u003e\n\u003cli\u003eSturdy, compact design delivers full hospital grade performance and lower profile\u003c\/li\u003e\n\u003cli\u003eExclusive screw terminal guards provide fast, easy insulation from conductive surfaces\u003c\/li\u003e\n\u003cli\u003eHeavy gauge 0.037\" triple-wipe brass line contacts provide excellent long-term plug blade retention\u003c\/li\u003e\n\u003cli\u003eScrew-Catch feature on device speeds mounting of wallplates \u003c\/li\u003e\n\u003cli\u003eExtra-long mounting straps help secure installation in poorly cut wall openings \u003c\/li\u003e\n\u003cli\u003eSolid one-piece brass grounding systems assures ground integrity under heaviest abuse \u003c\/li\u003e\n\u003cli\u003eGlass reinforced nylon base provides superior strength and high-heat resistance in contact carrier assembly \u003c\/li\u003e\n\u003cli\u003eTapered lead-in backwiring slots speed securing up to #10 AWG solid or stranded\u003c\/li\u003e\n\u003cli\u003eHigh impact and chemical resistant nylon face holds structural integrity, retains appearance; recessed lead-ins speed blade insertion, reducing scarring of face \u003c\/li\u003e\n\u003cli\u003eTri-head combination brass terminal screws are backed out, staked and afford maximum installation flexibility\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"20A \/ White","offer_id":49086921900284,"sku":"EATAH8300W-EA","price":12.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/EATAH8300W-EA-2.jpg?v=1778565197"},{"product_id":"eaton-8300w-white-duplex-receptacle-outlet-nema-5-20r-20a-125v-hospital-grade","title":"Eaton 8300W White Duplex Receptacle Outlet NEMA 5-20R 20A 125V Hospital Grade","description":"Eaton 8300W white duplex receptacle. Hospital Grade, NEMA 5-20R, 2-pole, 3-wire, grounding, back and side wired, rated 20A 125V. Hospital grade devices are top of the line in their category, designed for high-abuse environments such as those found in healthcare facilities. Features include:\u003cul\u003e\n\u003cli\u003eSturdy, compact design delivers full hospital grade performance and lower profile\u003c\/li\u003e\n\u003cli\u003eExclusive screw terminal guards provide fast, easy insulation from conductive surfaces\u003c\/li\u003e\n\u003cli\u003eHeavy gauge 0.037\" triple-wipe brass line contacts provide excellent long-term plug blade retention\u003c\/li\u003e\n\u003cli\u003eScrew-Catch feature on device speeds mounting of wallplates \u003c\/li\u003e\n\u003cli\u003eExtra-long mounting straps help secure installation in poorly cut wall openings \u003c\/li\u003e\n\u003cli\u003eSolid one-piece brass grounding systems assures ground integrity under heaviest abuse \u003c\/li\u003e\n\u003cli\u003eGlass reinforced nylon base provides superior strength and high-heat resistance in contact carrier assembly \u003c\/li\u003e\n\u003cli\u003eTapered lead-in backwiring slots speed securing up to #10 AWG solid or stranded\u003c\/li\u003e\n\u003cli\u003eHigh impact and chemical resistant nylon face holds structural integrity, retains appearance; recessed lead-ins speed blade insertion, reducing scarring of face \u003c\/li\u003e\n\u003cli\u003eTri-head combination brass terminal screws are backed out, staked and afford maximum installation flexibility\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fruit Ridge Tools, LLC","offers":[{"title":"20A \/ White","offer_id":49086923014396,"sku":"EAT8300W-EA","price":7.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/0310\/6044\/files\/EAT8300W-10PK-3.jpg?v=1778565228"}],"url":"https:\/\/frtelectrical.com\/collections\/hospital-grade-receptacles.oembed?page=3","provider":"Fruit Ridge Tools, LLC Electrical","version":"1.0","type":"link"}